When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product Description
Specification:
Product material: ABS stainless steel
Product size: 8.3*8.3cm/3.26*3.26in
Ultrasound host duration: about 60 minutes
Ultrasonic working voltage: 7.4V
Ultrasonic vibration frequency: 45KHZ ±2KHZ
Ultrasonic output power: MAX 12W
Function keys: host 1 touch keys, UV lamp 1 touch keys
Host battery: polymer battery 7.4V 1000mA multiplier 2C
Ultrasonic working current: MAX 1.7A
Ultrasonic charging current: Max 1A
Ultrasonic charging time: about 3 hours
Ultrasonic charging interface: TYPE-C 5V1A
UV lamp operating voltage: 3.7V
UV lamp: 4 UV violet LEDs
UV lamp battery: polymer battery 3.7V 110mA
UV lamp charging interface: TYPE-C 5V1A
UV lamp charging current: charging current: about 80mA
UV lamp duration: about 3 hours
UV lamp charging time: about 1.5 hours
Product noise: distance 30cm about ≦ 65db
Function and operation instructions:
1. Long press the switch button 1.5 seconds host boot, boot the default green light for the timer 3 minutes mode, the machine began to work, intermittent work mode for the work of 5 seconds
(stop 2 seconds), 3 minutes after the automatic shutdown. Long press the switch button again for 1.5 seconds to turn off the machine when working.
2. During the working process, press the button briefly and the blue light will be on, the mode will be switched to 5-minute timer mode and the machine will start to work (the intermittent working mode is 5 seconds and 2 seconds); press the switch briefly again and the machine will stop for 5 seconds and 2 seconds.
(intermittent work mode is 5 seconds stop); and then short press the switch button, and switch to timed 3 minutes mode, and so on.
3. In the mode of 3 minutes and 5 minutes in the process of work, such as the middle of the long press switch button 1.5 seconds to turn off the machine, the end of the machine automatically shut down timing.
4. Charging reminder: charging, the host of the red light breathing flash, full of red light off.
5. Sterilization lamp part of the working mode: 1. Sterilization lamp on: long press the switch button 1.5 seconds work indicator green light is always on, 4 sterilization lamps began to work on the bright purple light, the default timing 5 minutes, 5 minutes after the automatic shutdown of the machine; halfway can be long pressed the switch button 1.5 seconds to close the machine
6. Low battery reminder red light flash, charging red light breathing flash, full of red light off
One set contains:
1*Host
1*USB charging cable
1*Instruction manual
