Heat.net

Heat.net Store Home


SUNTEC AL35B Light Duty Heating Oil Pump Z-30 For Sale


SUNTEC AL35B Light Duty Heating Oil Pump Z-30


This item has been shown 46 times.

Buy Now

SUNTEC AL35B Light Duty Heating Oil Pump Z-30:
$60

OIL PUMP TYPE AL
GEAR SIZES 20-35-55-65-75-95

This is a general specification leaflet; for specific applications not covered herein, contact Suntec.

The SUNTECALoil pump incorporates a blocking solenoid valve with in-line cut-off function.

APPLICATIONS

- Light oil, B10 heating oil/biofuel blend (as defined in DIN V51603-6) and kerosene.- One or two-pipe system.

PUMP OPERATING PRINCIPLE

The gear set draws oil from the tank through the built-in filter and transfers it tothe nozzle line via the cut-off solenoid valve. A pressure regulating valve is used to dump all oil which is not required at the nozzle.
In two-pipe operation, the by-pass plug must be fitted in the return port, whichensures that the oil dumped by the regulating valve is returned to the tank andthe suction line flow is equal to the gear set capacity.

In one-pipe operation, the oil which does not go through the nozzle line is returned directly to the gear inlet and the suction line flow is equal to the nozzle flow. In that case, the by-pass plug must be removed from the return port, andthe return port sealed by steel plug and washer.

Bleed

Bleeding in two-pipe operation is automatic (except for AL 20) : it is assured by a bleed flat on the piston.
For AL 20 in two pipe operation, and for all models in one-pipe configurationthe plug of a pressure gauge port must be loosened until the air is evacuated from the system.

Cut-off

The solenoid valve of the AL pump is of the "normally closed" type and is situated in the nozzle line. This design ensures extremely fast response and the switching can be selected according to the burner operating sequence and is independent of motor speed.

When the solenoid is non-activated, the valve is closed and all oil pressurized by the gear set passes through the regulator to the suction or return line, depending upon pipe arrangement.
As soon as the solenoid is activated, oil passes to the nozzle line at the pressure set by the pressure regulating valve.

AL

AL - 11 - Ed 18 - January 2019

PUMP IDENTIFICATION

(Not all model combinations are available Consult your Suntec representative)

AL : pressure regulation and blockingsolenoid valve with in-line cut-off function

V : B10 applications

Gear set capacity(see pump capacity curve)

Shaft rotation and nozzle location(seen from shaft end)

A : clockwise rotation/right hand nozzle.

B : clockwise rotation/left hand nozzle.

C : anti-clockwise rotationleft hand nozzle.

D : anti-clockwise rotationright hand nozzle.

K : kerosene applicationsPump series4 : hub Ø 54 mm 5 : hub Ø 32 mmModel number

AL V 35 C K 9 5 xx 6 P 07 00

Revision number

Installation
P : by-pass plug inserted in return port

for two-pipe operationM : without by-pass plug,

return plugged,

for one-pipe operation Solenoid valve voltage

06 : 110-120 V ; 50/60 Hz
02 : 24 V ; 50/60 Hz
05/07 : 220-240 V ; 50/60 HzConnector cable length

00 : no cable
35 : 35 cm cable - 45 : 45 cm cable 60 : 60 cm cable - 10 : 1 m valve(NC)
open

Solenoid valve(NC)closed

Back to suction

Pressure adjustment

Shaft seal

By-pass plug inserted

TWO PIPE INSTALLATION

Gear set

Return

Pressure gauge port

To nozzle

Vacuumgauge port


Buy Now

Other Related Items:



Vintage Klenk Tools picture
Vintage Klenk Tools


Mastercool 43013 Vacuum Type Cooling System Filler Kit picture
Mastercool 43013 Vacuum Type Cooling System Filler Kit


Appion Mgavct 1/4
Appion Mgavct 1/4" Megaflow Vacuum-rated Valve Core Removal Tool


3/8
3/8" X 5/8" X 12 Ft Insulated 100%copper Tubing Ac Mini Split Ductless Line Set


American Food Service Epco 100a078p11 Thermostat picture
American Food Service Epco 100a078p11 Thermostat


Yellow Jacket 69702 Hose Plus 2 Injectors For Ac/r picture
Yellow Jacket 69702 Hose Plus 2 Injectors For Ac/r


Appion Mgavcr Mega Flow Vacuum Rated Valve Core Removal Tool – 5/16
Appion Mgavcr Mega Flow Vacuum Rated Valve Core Removal Tool – 5/16" System


Yellow Jacket 19648 Plus Ii 3/8
Yellow Jacket 19648 Plus Ii 3/8" Heavy Duty, 3/8" Straight X 3/8" 45 Degree, 48"