When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
KMC CONTROLS BAC-4001CW0002 TEMPERATURE SENSOR, BACNET, APPSTAT, 2H / 3C.
The thermostats were ordered wrong and installed, never powered on. In perfect working condition. Do not come with boxes, Items are exactly as photo showes.
The KMC AppStat combines the power of a space-mounted equipment controller with the convenience of built-in temperature, humidity and motion sensors. The controllers include a wide range of factory supplied programs for the following applications.
Two and four pipe fan coil units
Roof top units
Heat pump units
Packaged and split unitary systems
Stand alone operation No special programming, software applications, or setup tools are required to configure and commission an AppStat.
New or retrofit applications The attractive two-piece design is ideal for new installations or upgrades of older, less efficient thermostats.
Bright, full-color display The full color display is easy to read across a room even in bright sunlight. Users can easily choose between Fahrenheit or Celsius values.
Network ready All models are native BACnet, Application Specific Controllers ready to connect to a BACnet MS/TP network.
Fan Coil Units AppStats for the control of fan coil units are available with inputs, outputs, and sequences of operation for the following functions.
Three-speed or modulating fan control
Automatic or manual fan control
Two-pipe heating and cooling with either on/off or modulating valves
Four-pipe heating and cooling with either on/off or modulating valves
Remote space temperature sensor
Local temperature setback mode based on optional built-in motion sensor
Dehumidification on models with humidity sensor
Roof Top and Unitary Units AppStats for the control of roof top or similar packaged or split unitary units are available with inputs, outputs, and sequences of operation for the following functions.
Automatic or manual fan control
Modulating valves or on/off heating and cooling valves.
One or two stage heating
One or two stage cooling
Optional economizer
Remote space temperature sensor
Local temperature setback mode based on optional built-in motion sensor
Dehumidification on models with humidity sensor
Heat Pump Units AppStats for the control of heat pump units are available with inputs, outputs, and sequences of operation for the following functions.
Two stages of heat and two stages of cooling plus auxiliary heat
Optional economizer
Dehumidification-in models with auxiliary heat and a humidity sensor
Local temperature setback mode based on optional built-in motion sensor
Automatic or manual fan control
