When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
US Stock 2" HSS Annular Cutter Broach Bit Set of 6 for Magnetic Drill 1 Pilots
M2AL FORMULATION
US Stock Free Shipping
Specification
1-1/16"1PC
15/16"1PC
13/16"1PC
11/16"1PC
5/8" 1PC
9/16" 1PC
6.34/5.3*102mmPilot Pin 1PC
Cutting Depth: 2"
Weldon Shank: 3/4"
Material: HSS(M2AL formulation)
Package: Plastic Storage Case
Features
HSS annularcutters(M2AL formulation)will drill large holes up to ten times faster than regular drills bits.
Machine-finish hole with no reaming needed when using lubricant.
Make overlapping holes, slotting holes, and edge cuts.
Bit size is etched on each cutter.
Pilot pin helps locate center of hole location.
Pilot pin helps eject slug after drilling is complete.
During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
