VFD CNC Spindle Motor Kits 220V 2.2KW VFD + Spindle Motor + Water Pump + Clamp.. For Sale

Packaging includes

1 x vfd and spindle

• 1 X 220v input 2.2kw vfd （comes with a manual）
• 1 X water Cooled 220V-2.2KW 4bearings Φ80mm 400hz spindle (come with a 6mm collet)

1 x 80mm motor clamp

• Adopt high quality aluminum,the surface is oxidized polished, very smooth,safe to use.
• the accuracy is much higher , and it is hard to deform

1 x 220v water pump

• AC:220v-120V/50HZ 75W Hmax:3.2 QmaxFlow Rate:3200L/H Waterproof Grade:IPX8
• Easy to detach and clean
• Designed with a adjusting knob, allowing to adjust the water flow rate.
• Rubber suction cups can be a good fit in the glass surface, to help keep it stability.

1 x 5m hose

5 meter length hose, outer diameter 8mm, inner diameter 6mm

VFD specifications

• power:2.2KW
• horsepower:3HP
• input voltage:1 or 3 phase 220V(±5%),
• output voltage:220V 3 phase
• input Frequency: 47-63Hz
• output frequency:0-50/60hz 0-400hz
• Rated current:10A (Represents the maximum current the VFD can withstand)

Spindle specifications

• Bearing: 7005 (2pcs)and 7002(2pc) bearings
• Voltage and rated current: AC 220V, 10A
• Operating speed:8000rpm-24000rpm
• Radial runout:≤0.025mm clamping mandrel vibrates at 30mm to nut
• Frequencies: 400Hz
• Size:80*238 (mm)
• Collet: ER20 collet, 6mm is standard
• Nut model: ER20-A(B)

Establish a connection

• The single-phase input wire is connected to the R and T terminals, and the motor output wire is connected to the UVW terminal of the VFD.
• basic parameters for 400hz spindle：pd013=8，pd005=400,pd004=400 pd003=400 pd072=400，pd144=3000, pd002=1 pd070=1，(All VFD parameters are set before delivery,so you can connect and drive directly after you receive the kit)

VFD function introduction

Diverse terminals, more functions for you to choose.

• supports external potentiometer control(connect the "FOR" and "DCM" terminals,than set PD001=1)
• supports mcah3 function and RS-485 communication
• (For more information, you can contact the seller, we will send you a video of the basic functions of VFD)

Key Function

• UP: Progressively increase data or function codes.
• DOWN: Progressively decrease data or function codes.
• SET: Enter menus step-by-step, save setting parameters.
• PRGM: Exit current(or present) state, switch among each states, mainly used to switch monitoring state, exit to previous menu.
• FWD/REV: 1, Press momentary button to start,release to stop; 2 Switch the rotation direction
• SHIFT: Switch monitoring parameters at monitoring state, at secondary menu, move data box to process editing position.
• Kindly Note: If you want to show RPM in the display,please press 'SHIFT' key

Advanced motherboard features

• PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
• Easy PLC function can realize 16 legs of speed and inverter control function
• RS485 communication port, adopting standard international MODBUS main circuit control
• With extremely strong anti-jamming capability
• Low output ratting torque0.5HZ-150%, low speed running ability
• Carrier adjustable by 16KHZ, completely soundless working environment
• Broad voltage working area, normal running in 304V-456V
• Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
• With perfect error protection and short circuit starting protection capability

Spindle introduction

4 high precision bearings

With 4 high-precision bearings, high precision and strong torque are guaranteed

Aviation connector

Power interface: YX20 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 inter-faces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire

NOTE

It is recommended that only the spindle be used to cut the wood, which can improve the service life of the bearing