Victor Model S2080G, 20\"/27 1/2\" x 80\" Geared Head Engine Lathe, 3 1/8\" Hole For Sale

Available for your inspection under power and purchase at our Warehouse in Beautiful Downtown Miamisburg, Ohio is this \"ABSOLUTELY EXCELLENT\"VictorModel S2080G, 20\" / 27 1/2\" swing X 80\" cc Removable Gap Geared Head Engine Lathe.We have run this machine through all speeds and feeds and find it to be in Absolutely Excellent Operating and Cosmetic Condition. Further, it is equipped with a very desirable 3 1/8\" Spindle Hole, Inch and Metric Threading. The motor is 10 HP/230V/3PH/60CYC.TheseVictor Engine LathesareExcellent Engine Lathes Built With a Lot of Quality in Taiwan

Specifications are as follows:

Machine Specifications:

ModelS2080G,

Hole Thru 3 1/8\"
Swing Over Bed Ways.......................... 20\"
Swing thru 27.5\"
Swing Over Cross-Slide........................ 11.5\"
Distance Between Centers.................... 80\"
Spindle D1-8

Tailstock, SpindleTaper..................... #4 MT
(16) Spindle Speeds, Range................. 31 to 1,500 RPM

Carriage LongitudinalFeeds............. .0034 to .0236 IPR

Cross-Slide Cross Feeds......................0016 to .0108 IPR

Thread Changes, Range...................... 4 to 56 TPI
Metric Thread Changes, Range......... 0.25 to 6 MM Main

Floor Space Required, L x D...............10\' 5\" x 3\' 5\"
Overall 3\' 11\"
Weight, Approximately...................... 5,190#

Equipped With:

14\"4-Jaw Chuck
12\" 3-Jaw Chuck
8\" Steady Rest
Aloris Tool Post w/ 2 Tool Holders
19 1/2\" Face Plate

Hardened & Ground Bed Ways
Inch/Metric Threading

We believe the new owner of this Victor S2080G

Geared Head Gap Frame Engine Lathe will be very happy with it.

We invite you to check our response and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we\'ve been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, Credit Card, PayPal, or even Cash.

We are:

Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.

For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number 877-922-4212(ask for Reenie), A&P Freight Services; toll free number 800-628-6419 Ext 225 (ask for Paul), Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Mark), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris). All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.

Inform them that they will pick up your machine at our warehouse at 515 Kercher St., Miamisburg, OH 45342. TheVictor Engine Lathewill weigh approx. 5,100# and occupy 10 1/2’ of bed space. Further, inform them it needs tobe tarped.