XH-W3002 W3001 NTC Digital LED Temperature Controller Thermostat Control Switch For Sale

Details

• Shipping Policy
• Payment Method
• Returns Policy

• Home
• Payment
• Shipping
• About us
• Contact class="navi-menu-list left">
• Home
• Payment
• Shipping
• About us
• Contact us

• Product View

  Details

  XH-W3001 Features:
  automatic mode
  Wide temperature control range
  High temperature control accuracy
  reverse connection protection
  easy installation Product parameters:
  Product name: Microcomputer temperature controller
  Product Model: XH-W3001
  Supply voltage: 12/24/220V
  Temperature measurement range: -50℃~110℃
  Temperature control range: -50℃~110℃
  Temperature control accuracy: 0.1℃
  Load power: 120/240/1500W
  Measurement input: NTC10K waterproof probe L=1 meter
  output type: direct output
  Output capacity: max 10A
  Installation hole distance: 73mm (diameter 4mm)
  Appearance size: 60*45*31mm Instructions
  To set the startup temperature:
  Press the up button once, the startup temperature will be displayed, long press the up button for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down buttons
  Set stop temperature:
  Press the down button once to display the stop temperature, long press the button for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down buttons
  reset:
  When the power is on, press and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings XH-W3002 Feature: The high-brightness digital tube clearly displays, whether it is used during the day or at night, it can be read clearly
  The sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will
  ABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance, anti-aging
  -50~110℃ ultra-wide temperature control range, can be used in various temperature control fields, 0.1℃ temperature control accuracy, to meet your control needs
  Wiring input and output design, more convenient to use in various industrial control equipment, multi-strand wire 300V/20A excess configuration, safe and reliable Specification:
  Product name: Microcomputer temperature controller
  Product Model::XH-W3002
  Temperature measurement range: -50~110℃
  Temperature control range: -50~110℃
  Temperature measurement accuracy: ±0.2℃
  Temperature control accuracy: ±0.1℃
  Measurement input: NTC10K L=1 meter waterproof probe
  Input power: 12/24/220V
  Output power: 120/240/1500W
  output type: direct output
  Output capacity: max 10A
  Installation hole distance: 73mm (diameter 4mm)
  Appearance size: 60*45*31mm Set using:
  Code and function introduction
  P0 set startup temperature
  Press the setting button once to enter the internal menu, the default display is P0, press the setting button again, and set the required startup temperature by pressing the up and down buttons.
  P1 set stop temperature
  Press the setting button once to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the setting button again, and set the desired stop temperature by pressing the up and down buttons.
  P2 Set temperature correction
  Enter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.
  P3 set delay start
  Enter the internal menu in the same way, switch to P3 by pressing the up and down keys, press the setting key again, and set the required delay time (unit is minutes) by pressing the up and down keys. Delay start is generally used for compressor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compressor back pressure, the general setting value is 3-6 minutes. If you are not used to control the compressor or do not need delay time function, skip this item directly. Package include:
  1x Thermostat
  • Shipping Policy
  • Payment Method
  • Returns Policy
  Shipping Policy

  We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

  -We ship items to Worldwide. Thank you!

  -we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.

  Payment Method

  We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.

  2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

  3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

  Returns Policy

  1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

  2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

  3. Please include your ID and item number with any email requests.