When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Specifications:
1. Light Type : H4 9003 (High Beam and Low Beam) +H11 (fog light)
2. Input Power : 50W/set (25W/bulb)
3. LED Type : AUIMSOCO COB LED Chips
4. Luminous Flux : 5000lm/set (2500lm/bulbs)
5. Operating Voltage : DC 9V-32V (fits 12V/24V vehicle)
6. Color Temperature : Cool White 6000K
7. IP Rate : IP68
8. Operating Temperature : (-40C) to (+80C)
9. Material : Aviation 6063 Aluminum Profile
10. Life-Span : 50,000Hrs+
11. Lamp base designed : Turbo designed
12. Installation : Plug and Play
13. Beam Angle : 360°
14. Warranty: 1 Years Warranty
Foglight :
Plug Type: H11
LED Quantity(each bulb): 2pcs* AUIMSOCO CSP chips
Luminous Flux: 3000LM/set (1500LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
IP67 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light,Daytime Running Light DRL
Package Content:
4pc led Bulb
Automotive LED headlamps advantages:
1. LED lights than traditional halogen energy, more power.
2. Xenon lamp brightness and proximity , but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact , effectively protecting the car comes with a battery , improving battery life of more than 30%.
3. Fast cooling , the appearance of the most advanced design , thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode , the car can respond to a variety of voltage instability , the effective protection of normal use Led efficient and simple structure . Fewer Components damaged, repair the probability is very low , compared with HID ballast repair lower than 80% .
4. Heating temperature is low , protect the car . Xenon working temperature up to 800 ° -1000 ° , the main reason for the car ignition .
5. LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !
6. Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear , about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
