Heat.net Store Home
|
05-12 Jeep Liberty Dodge Ram Durango Dakota 3.7L Master Engine Rebuild Kit VIN K For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
05-12 Jeep Liberty Dodge Ram Durango Dakota 3.7L Master Engine Rebuild Kit VIN K:
$435.28
DodgeDakota3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY with plastic valve covers05 - 09
DodgeDurango3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY with plastic valve covers07 - 11
DodgeNitro3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY05 - 10
DodgeRam 15003.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY with plastic valve covers06 - 10
JeepCommander3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY05 - 10
JeepGrand Cherokee3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY with plastic valve covers05 - 12
JeepLiberty3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY with plastic valve covers06 - 09
MitsubishiRaider3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY11 - 12
Ram15003.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLY2011
RamDakota3.7L 226CID V6 SOHCSpec Note:(12 Valve) VIN Code "K" - NGC Design ONLYPackage Contents
- Multi-Layered Steel head gasket
- Intake manifold gasket
- Exhaust manifold gasket
- Valve cover gasket
- Viton valve stem seals
- Camshaft front
- O-rings
- Front Seal Gasket
- Rear Seal Gasket
- Water Pump Gasket
- Oil Pan Gasket
- Other Small Gaskets
- 6 Pistons (Available in Standard and Oversizes: .50mm = .020")
- Complete Ring Set for 6 Pistons (Available in Standard and Oversizes: .50mm = .020")
- Wrist Pins and Clips
- Compression Ratio: Stock
- Bore Diameter: 93.00 mm
- 1st Group: 1.50 mm
- 2nd Group: 1.50 mm
- Oil Ring: 3.00 mm
- Complete Main and Rod Bearings
- Main Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010")
- Rod Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010")
- Rod Bearings WITHOUT locating tangs - no longer needed for installation
- Trust Washers
- Please specify which bore size you want by leaving us a note during check out. There are other oversizes available please contact us for special order.
- Oil Pump
- Water Pump
- Timing Chain Kit
- 1 Timing Chain Lower (primary - 70 links)
- 2 Timing Chain (cam drive - 94 links)
- 1 Primary Center Tensioner
- 2 Tensioner (left and right)
- 2 Guide Rail (left and right chain fixed rail)
- 2 Guide Rail (left and right tensioner rail)
- 1 Cam Sprocket (right - 26 teeth has reluctor ring)
- 1 Cam Sprocket (left - 26 teeth)
- 1 Crank Sprocket (25 teeth)
- 1 Idler Sprocket (primary - 50 teeth)
- Head Bolts Set
- 16 Long Head Bolts
- 8 Short Bolts
SKU#: FSGM30301, PSMI037, MB4102SI, CR6822SI, TW7214, OPMI047, TKMI037L, WPMI047, HBGM30300
Additional Information+ This engine rebuild kit is just what you need to keep your car in good running order. The rebuild kit that you will receive in this kit are high quality parts that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair.
+ This rebuild kit is designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit.
+ Please refer to the listing pictures for an accurate description of the parts included in the kit.Image Gallery
|
|
Other Related Items:
Related Items:
05-12 Jeep Liberty Dodge Ram Durango Dakota 3.7L SOHC Engine Rebuild Kit VIN K $399.99
05-12 Jeep Liberty Dodge Durango Dakota 3.7L Engine Rebuilding Kit "K" Graphite $399.99
05-12 Jeep Liberty Dodge Ram Durango Dakota 3.7L Master Engine Rebuild Kit VIN K $435.28
|
