100Mesh Universal Mill Pulverizer Chemical Electric Grain Medcine Food Grinder For Sale

　

110V Universal Pulverizer
If you want this machine please contact us !!!Features:

• Stainless steel appearance, durable, corrosion resistance.
• Low-carbon environmental protection, low noise, easy cleaning
• Simple operation, the thickness of the pulverization can be achieved by different aperture sieves.
• The material of the machine reaches the food grade, and the part contacted with the material has the characteristics of acid and alkali resistance.
• The movement of the machine is one-way high-speed continuous rotation.
• This machine is made of the stainless steel, surface of the inside of the machine is smooth, which changes the phenomenon of inboard wall coarse and accumulating of powder in the past.
• The materials are discharged directly from mainframe, the size of the granularity is gained through changing different pore size sieve.
• The thickness of the powder (10-120 mesh) can be adjusted by changing the screen. Suitable for grinding Chinese medicine, cereals and various condiments. Let you experience a different way of eating.
• The front cover of the machine must be opened after the machine is stopped, which is used to clean the inner cavity of the machine to ensure the cleanliness of the working face of the machine.

Notice:

1.It is onlysuitable fordry materials. Wet materials or liquid might make the machine breakdown.

2.It isnotsuitable for theherb.

3.It isnotsuitable for the toolight material.

The reasones of thosecannot serve asreturn. Please buy it withcautious.

　Direction for use1. It should be checked before using the machine that whether transmission parts are loose or the other anomaly is produced, the direction of the machine operation should be consistent with the direction of the arrow shown.
2. Taking no-load test for 1-2 minutes before using the machine. Materials can be feed after the machine is operating normally. Increasing the feed gradually and taking observation of electric current and the functioning of the motor. Blanking flashboard can be fixed only after feeding and current balance to be in normal.
3.Drying the materials or using coarse screen stencil if the materials are too wet or have poor mobility, which cause poor discharge. Opening the front cover to Replace the screen stencil. Hand wheel must be tightened to ensure the front cover and the case remain sealed.
4.Stopping feed for 5-10minites before shutdown the machine in order to reduce the residual material.Technical parameters

Spindle Speed

7000r/min

Material Limit Size

5*5*5mm

Production Capacity

2-5㎏/h (4.4lbs-11lbs)

Working Noise

≤85db

Direction of Rotation

Clockwise

Voltage

110v

Motor Power

1.1KW

Overall Dimension

　

Notice:

1.The screen is80 mesh, ship with original package. If you need other mesh size, please contact us.

2.The machine calculate the output bywestern medicine raw materials, because the materials are different, It is difficult to achieve uniform standards.

3.The output also depend on thesize of the mesh. The smaller particlewill cause the lower output.

　

Different View Of MachineThe Upward View of MachineThe Gear of MachineDischarge PortElectric CabinetMaintenance and RepairRegular checking bearing and replacing with high-speed butter to ensure the normal operation of the machine, it is necessary to frequently check wearing parts which need to be timely replaced if there is any severe wear phenomena.
When operating the machine, if spindle speed was found to gradually decline (Triangle loosed) turn off the machine and downward adjustment of the motor (attention to the same elastic of the Triangle, if there is inconsistencies in the Triangle, replace it). This will enable the machine can achieve the required speed. Abnormal checks should be shutdown.
Metal materials are strictly prohibited inflow the inside when the machine is running, such as nails, iron and so on.
Cleaning of residues in various parts of machine after turning off it, the machine which is disabled for a long time require to be wiped out and is with good cover sheeting.