When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1/4\" USA Steel Fabricated Control Arms for stock to 1 1/2\" Lift Height2003 to 2009 Dodge Ram 2500/3500 4WD
These are brand new1/4\" USA steelconstruction. They areCAD designed,CNC Plasma Cutand craftsmanWeldedfabricated control arms. They are designed to fit the front of a Dodge Ram 2500 3500 4x4 with Stock to 1.5\" lift height.
This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly.If you\'ve installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well.
If your front tires are close to rubbing the fenders near your doors, you may need our high clearance arms to properly re-center your axle!
Our ARMS areguaranteed to perfectly fit your year model truck(year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment).
Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck.Some of these lower cost competitors buy their \"One Size Fits All\" arms from China. Stryker is proud of ourMADE IN THE USAsourcing.Ifyou see a kit with lots of extra partsyou might consider one exclusively designed for your truck.
Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within!
Many competitors even uselower costRubber Bushings.
These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2\", 2-3\", 3 1/12\" to 5\" and 5 1/2\" to 7\" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! That\'s correct, Stryker designs and manufacturers a Fabricated control arm to match your truck.In OUR worldof Rugged StyleONE SIZE DOES NOT FIT ALL TRUCKS!
Stryker isconfidentin offering you aLIFETIME WARRANTYon our Fabricated control Arms because the Quality of theEngineered InspectionWARRANT ONE!
- CAD Designed for your HEAVY DUTY TRUCK.
- I-BEAM construction for the ULTIMATE in Strength and Durability.
- 1/4\" USA STEEL for the confidence you need!
- Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).
- DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.
- Stryker\'s Craftsman Weldersbuild these inHOUSE here in Marysville, TN!
- Powered Coated in the USA under strict Stryker oversight and inspection.
- Threaded ZERK fittings for a lifetime of optimal performance!
- And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement.Not a bunch of spacers and shims to make something kind of work!
You also may want to review our NEW Fabricated High Clearance Control Armsfor less Tire Rub and IMPROVED TURNING RADIUS!
You also may want to review our NEW Fabricated High Clearance Control Armsfor less Tire Rub and IMPROVED TURNING RADIUS!
These are brand new1/4\" steel construction,CAD designed, andplasmacutfabricated control arms for the front of aDodge Ram 2500 3500 4x4 with stock to 1 1/2\" lift height.ThisI-BEAM Fabricationis the epitome of Stryker\'s commitment toRUGGED STYLE!This is for a set of 4, includes 2 uppers and 2 lowers.
Stronger than factory stamped steel armsCAD designed and CNC Plasma Cut at Stryker Off Road.Beefy 1/4\" steel construction w/ DOM collarsDaystar brand PTMEG poly bushingsYear-model-specific DOM sleeves - Built for YOUR truck model and year.Greasable zerk fittings pre-installedBrackets are 100% USA SteelMade in the USA!Description:
Our strong 1/4\" steel construction fabricated control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in!Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within!These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2\" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence!If your front tires are close to rubbing the fenders near your doors, you may benefit from our high clearance version above!Kit Contents:
(2) Upper Fabricated Control Arms
(2) Lower Fabricated Control ArmsFitment:
2003-2009 Dodge Ram 2500/3500 4WD with stock to 1.5\" of Lift HeightTechnical Notes:
Also fits all Mega Cab models; Re-uses factory hardware
![2003-2009 Dodge Ram 2500 3500 4WD 0-1.5\](img-large/g/DoEAAOSwRrBg7H6S/s-l1600/2003-2009-Dodge-Ram-2500-3500-4WD-0-1-5-Upper-Lowe.jpg "2003-2009 Dodge Ram 2500 3500 4WD 0-1.5\")
