When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PACK OF 7 RODS of Harris \"0\" (zero) for copper to copper brazing
P/N: 0618F - .050\" x 1/8\" x 18\" rod size
Come in an handy clear tube packaging
This low cost alloy is suitable for most copper-to-copper or brass joints where close tolerance can be maintained.
Braze better than 15% silver for way cheaper. Older mentality require silver in brazing but its false now. I use this rod for assembling all our conversion kits, retrofit and \"0\":
This low cost alloy is suitable for most copper-to-copper or brass joints where close tolerance can be maintained.
AWS A5.8 BCuP-2, ASME Section IIC SFA 5.8 BCuP-2, ISO 17672 CuP 181
TYPICAL PHYSICAL PROPERTIES:
Solidus 1310ºF (710°C)
Liquidus 1460°F (793°C)
Brazing Range 1345°F- 1500°F (730°C -816°C)
Electrical Conductivity 9.9 (%IACS)
Electrical Resistivity 19.2
Harris 0 is an economical alloy designed for brazing copper to copper connections. This alloy flows quickly at brazing temperature so requires close joint tolerance, less than 0.005”. is a frequent choice for copper brazing.