When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
APC-80HF is the newest model of the professional digital control plasma cutting machine with built-in advanced inverter technology. Its high-quality design was manufactured in accordance with industrial level standards. The machine has a high-cutting performance and is very user-friendly with a beautiful appearance and exquisite production technology. The instrument and air pressure regulator are installed inside the machine on the panel, making it more convenient and easier to use. The air filter is installed in the machine and is controlled automatically by a solenoid valve, which greatly improves the work efficiency. The normal cutting thickness of APC-80HF air plasma cutting machine is 1.2 inch, and the maximum cutting thickness is 1.5 inches.
vAPC-80HFincorporatesthe most advanced IGBT inverter technology and non-touch pilot arccutting processes,resulting inexcellent arc stability.The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc.The lightweight model designmakes the machinevery convenient to carry anywhere.
vAPC-80HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals.Can cut up to 1.2in.stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting instraight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
vAPC-80HF is an intelligent power supply system. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V. It is designed for demanding industrial work and construction as well as simple tasks around houses. With less work, you can get a better overall result with a sharper cut.
v80% duty cycle can ensure long-termand efficientcutting.NPT 1/4 inch industrial D-type couplercaneasily and quicklyconnectto the air compressor.Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation;the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
vAPC-80HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc.The fan with automatic temperature control allows the machine to run very quietly.
Specifications:
- Type:Non-touch Pilot ArcPlasma Cutter
- Supply Power: AC 200-250V, 50Hz-60Hz, 1-Phase
- Rated Input Current: 67-Amp
- Cutter Current Range: 20-80 Amp
- Nominal DC Open Circuit Voltage: 265-Volt
- Output Voltage: 112-Volt
- Duty Cycle @ 104F(40c): 80% @ 80-Amp
- Efficiency: 85%
- Power factor: 0.93
- Output Terminal Type: Direct Wire
- Cooling Method: Fan Air Cooled
- Gas Supply:CleanDryOil-FreeAir
- Recommended Gas Inlet Flow:6.5scfm @90psi
- StandardSeverance Cutting Thickness: 1.2in.
- Maximum Severance Cutting Thickness: 1.5 in.
- Movement Speed: 15.0 in./min
- Net Weight: 29.0 lbs.
- Product Size:20.0x8.7x 15.7in.
- Package Weight: 43.0 lbs.
- Shipping Size: 22.0 x 13.0x 16.5in.
Package Included:
- APC-80HFNon-touch Pilot ArcPlasma Cutter Machine.
- AP-80 13-Feet / 80-Amp Plasma Torch Gun Assembly.
- Consumables: 2-Electrodes, 2-Shunts, 2-Bakelite Cups & Roller Guides.
- 10-Feet 300A Work Clamp Assembly, 35-50mm Lead Dines.
- Air Filter and Pressure Gage (Installed inside the machine).
- Owner’s Manual.
