When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AUTOKING Iron Man MK5 1:1 Helmet Wearable Voice-control Mask Halloween Cosplay
AUTOKING Iron Man MK5 1:1 Helmet Wearable Voice-control Mask Halloween Cosplay
In stock
Material: Plastic ABS
Height: 62 cm / 24.4 In\'
Item needs AA（1.5v）battery *4、AAA battery *2 (Without battery, the battery cannot be sent internationally )
Note: If the AA battery power is lower than 1.5V, it may lead to slow response of the helmet, poor eyes and other problems.
Helmet can be controlled by voice like the instructions below
Size :Wearable within 60cm head circumference
1. Three Control Models:
*Touch Control:
Touch The Sensing Area Of The Right Ear: Control The Mask Multi-chip Open/close
Touch The Left Ear Sensing Area: Control The Mask To Open/close
* The Operation Function Of Remote Control:
A Control Mask Integral Open/close
B Control Mask Multi-chip Open/close
C Limit Switch Color.
D Eye Light On/off
E Helmet Sound On/off
* Voice Control: English Voice Commands
Before Operating The Command, You Need To Execute The Jarvis/jarvis\" Wake Up System.
To Proceed With The Subsequent Command Operation. Within 5 Seconds Of Waking Up The System.
Can Continuously Input Voice Operation Commands.
Failure Analysis
- If The Matching Password Fails, Try To Match The Password Again After Charging The Force Control.
- The Eye Lights Flickered Slowly, The Motion Was Slow, The Sound Was Blurry, And The Battery Was Low, A New Battery Should Be Replaced
- Operation Failure, Abnormal Situation, Restart The System.
- Wear Helmet, Automatically Detect Failure And Restart The System.
Safety Operation Warning
- Notes For Starting: Before Starting The Helmet (or When Restarting The System Power)
- It Is Necessary To Ensure That The Mask Is Closed Smoothly Before Starting Up, Such As The Existing Part Of The Mask
- When All Parts Are Open, All Parts Need To Be Closed Manually Gently To Ensure That The Surface Is Not Stable
- Turn Off And On Again. When The Product Is Not In Use For A Long Time, Please Remove The Dry Battery.
- It Is Strictly Forofferden To Play With The Mask Opened By Manual External Force Flap. Corpse Is Forofferden When The Helmet Is Opened And Closed.
- An External Force Impedes Movement, Causing Different Damage To The Opponent.
- Non-professionals, Do Not Disassemble The Product By Yourself.
Battery Case And Wearing Instructions
- The Battery Case Is Hidden On The Back Of The Black Pad On The Back Cover
- Please Take Off The Back Cover Before Wearing
- Wear A Head Circumference Of 60cm And Bring Your Own Helmet Battery
- Remove The Back Cover Before Wearing The Helmet
-install The Back Cover After Wearing It
- Four AA（1.5v） Batteries
- Remote Control Battery: AAA Battery
