Axeon RO/DI Inline Flow Restrictor 300-1200 cc/min (36/50/75/100/150 GPD) For Sale

Premium inline flow restrictors. Available for 50 gpd, 75 gpd, 100 gpd, and 150 gpd RO membranes. Install the flow restrictors between the \"Brine\" port on the RO membrane housing and drain saddle, for systems with an automatic shutoff valve. For systems with a permeate pump, install between \"Brine\" port on the RO membrane housing and \"Brine In\" port on the permeate pump. Directional arrows are provided on the flow restrictors. For correct flow restrictor sizing, please consult your membrane manufacturer or use the guide below. We recommend a brine:permeate ratio of 3-4:1 for optimal results (i.e. RO water production and membrane life). Recommended flow restrictor based on stated RO membrane daily water production rate*

• 36 GPD = 300 cc/min - 350 cc/min
  
• 50 GPD = 350 cc/min - 420 cc/min
  
• 75 GPD = 550 cc/min - 800 cc/min
  
• 100 GPD = 800-1000 cc/min
• 150 GPD = 1000-1200 cc/min
  

Brine:Permeate Ratio*

• 36 GPD = 3.17:1 (300 cc/min) to 3.70:1 (350 cc/min)
  
• 50 GPD = 2.66:1 (350 cc/min) to 3.2:1 (420 cc/min)
  
• 75 GPD = 2.79:1 (550 cc/min) to 4.05:1 (800 cc/min)
  
• 100 GPD = 3.04:1 (800 cc/min) to 3.8:1 (1000 cc/min)
  
• 150 GPD = 2.53:1 (1000 cc/min) to 3.04:1 (1200 ratios are calculated based on rated RO membrane daily water production rate (GPD). The recommended flow restrictor may vary, based on RO membrane manufacturer.