When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BEEYUIHF 3M/10ft Desoldering Wick Braid, 2.5mm/0.10'' Width Solder Wick Braid With Flux, No-Clean Soldering Wick Wire Roll Remover tool, Desolder wick Braid, Disassemble Electrical Components
Product Specification:Model: Solder WickLength: 3M/10ftWidth: 2.5mm/0.10inchMaterial: copper
Desoldering Wick advantage:1. Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.2. Fast heat conduction, suitable for various electronic PCB circuit boards.3. The tin suction line is woven with flat needles, soft design, fast heat conduction, suitable for rapid tin suction, improving work efficiency.4. Woven flat needles.5. The tin suction line is woven with flat needles, soft design.
Feature:1. High efficiency and save the electric repairing time.2. Avoid the high temperature destruction of electric pad.3. Design in precision,guarantee the max surface tension and the ability of absorbing tin.4. Speed up the speed of absorbing tin and low residue of flux.5. Increase the speed of cleaning the PCB pad.6. Oxidation resistivity and anti-corrosion protection,good thermal conductivity.
Please note:Quickly removes unwanted solder when used with a soldering iron.Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
Use:1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.2. Remove the desoldering wick after the solder has been absorbed.3. Cut off the used section of the wick using nippers.
FOR LEAD-FREE DESOLDERINGOur thin and soft desoldering wire flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks.
Different Size for choose:5 Pieces 2.5mm 3M Desoldering Wick
