Heat.net Store Home
|
Blacksmith Drift Kit Large Hammer Tomahawk Mouse Ax Drifts Hammer Eye Drift Tool For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Blacksmith Drift Kit Large Hammer Tomahawk Mouse Ax Drifts Hammer Eye Drift Tool:
$83.55
- Muti-Purpose Application --- Special-designed for beginner or seasoned blacksmiths and Knifemakers to use to form the hole needed to handle hand made hammers, ax, or tomahawks etc.
- Ultra-Strong Craftsmanship --- Made of premium steel material, coated with non-slip wax on the surface, rust resistance and corrosion resistance withstand high heat. Our drift tools give great support in control, stability, strength, long-term resilience, safety and quality.
- Easy To Use --- Most smiths drill a series of small holes as close together in the center of the work piece to be drifted. Once drilled heat the item and use a cold chisel or similar tool to split the piece. Then heat again and drive the drift through the hole. Tap the sides of the work piece while continuing to drive the drift into the work piece until the drift hole gets to the desired measurement. Several times heating are needed to get the desired shape.
- Professional Design --- The tools are approximately 11 inch long. [Large Tomahawk Drift] small end size: 3/8 x 3/4, large end size: 7/8 x 1 1/4; [Large Hammer Drift] small end size:5/8 x 7/8, large end size:3/4 x 1 1/8; [Mouse ax Drift ] small end size: 5/16 x 7/16, large end size:5/8 x 7/8.
- Satisfaction Guarantee --- If you\'re not 100% satisfied with our products, simply return it in 30 days for a full refund, with unconditional refund guarantee and 12-month warranty.
- The process used by most smiths is to drill a series of small holes asclose together in the center of the workpiece to be drifted.
- Once the holes are drilled heat the item and use acold chisel or similar tool to split the piece. Once split, heat the piece againand drive the drift through the hole.
- Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift gets to the desired masurement. Several times heating are needed to get the desired shape.
|
|
Other Related Items:
Related Items:
Blacksmith Forged Axe Eye Drift Mandrel Blacksmith Tool Blacksmith Drift Tool $38.30
Blacksmith Drifts Kit Large Hammer Tomahawk Mouse Ax Drifts Hammer Eye Drift Set $83.50
Mandrel Blacksmith Drift Tool Tomahawk Eye Drift, Forged Axe Eye Drift Tool Set $58.18
|
