When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Genteq Eon 42
Lot 2 pieces
5SBB29DSA0095
Motor 1/8HP 1PH 120V 300-1800 RPM
&
Eon42
Module (smaller one) HS04
E338178
1/8 HP
120V
Both NEW WITHOUT BOX.
They clip together
EON®
42 MOTOR
The EON 42 is a more energy efficient solution for the standard PSC motor
found in many fan coils and blower deck
applications today saving up to 56% of
the electricity consumed by the motor.
This motor offers simple installation
along with a wide range of horsepowers,
voltages, and mechanical features, truly
making the EON 42 the simplest and
most cost effective upgrade solution
Specifications
Variable speed, constant torque
motor to fully variable operation,
constant speed/constant
torque/constant airflow modes of
operation
Designed for direct drive blower
applications
120V or 208/240/277V AC single
phase input, 50/60Hz
Available in 1/15 HP (Low speed only)
as well as 1/8hp and 1/4hp (high and
low speed)
Operating speed range: High Speed
300 - 1800 RPM and Low Speed 300
1200 RPM
NEMA® 42 Frame
UL and cUR recognized component
Features & Benefits
Multiple input options : PWM variable
speed operation, 3 discrete line
voltage speeds
24 volt discrete input selection
6kV surge protection
Blak Box Technology enabled
Ball bearing construction
Efficiency exceeding 78%
Low voltage AC or DC thermostat
inputs allow for use of existing
system controls
PWM control allows for fully variable
speed retrofits
Applications
Fan Coils
Kitchen Ventilators
Air Curtains
Unit Heater/Cooler
Getting started with the Eon 42 Motor
Fundamentals: The Eon 42 can be either a constant speed or a constant torque, high efficiency motor designed for indoor blower application.
In variable speed mode, the regulated RPM or torque is proportional to the PWM signal. Alternatively, the OEM can supply a PWM
signal from his own system controller. This PW signal should be a square wave
Specifications: The Eon 42 is available in
having amplitude of at least 10V with 30V
1/15 HP(7 oz-ft), 1/8 HP(10 oz-ft), and ¼
maximum amplitude and a frequency range
HP(22 oz-ft) with an RPM range of 300-
from 40 Hz to 200 Hz.
1200 and 1/8 HP(7 oz-f0) and HP(15 oz-
ft) with an RPM range of 300-1800.
Voltage rating options are 120V or 208-
240/277V. 60/50 Hz.
Creating your Sample: There are a variety
of options to consider when ordering your
Eon 42 motor. These include overall length,
speed or torque requirements, shaft length,
length of shaft flat, single or dual shaft
configuration, and mounting method. The
most common mounting method is resilient
ring with or without a base. Other mounting
options include extended clampbolts, belly
band, or lug mounting.
Control Options: The Eon 42 is capable of being controlled via either a PWM control signal in a continuously variable speed mode, directly from 24VAC input
thermostat type signals in a discrete speed or torque mode, or directly from line voltage
type signals in a discrete speed or torque mode. Variable speed mode will help in collecting system performance data, which can be valuable in developing a motor
program that will optimize your application.
The ECM Toolbox software can be used to switch the motor from one mode to another if the customer harness allows for these
inputs. The PWM control signal can be
provided directly from the ECM Toolbox
with the ECM Programming Module or the ECM development box with the use of our 142R cable accessory. The ECM
Development box and the ECM Toolbor
with the Genteq Serial Box also add the
ability to apply 24 V discrete signals to the mo or
In discrete speed or discrete torque mode,the motor can operate in up to three programmed speeds selected via 24VAC or
line voltage signals. Once the required
operating speeds or torques for the
application have been determined and all the mechanical features defined, you may order a new sample programmed with your desired speed or torque settings and your
input voltage settings.
Connecting the Eon 42: The wiring
configuration of the motor will depend on the number of speeds needed. The Eon 42
comes standard with a 61" wire harness and 0.5 bare wire strip leads. An example of an
Eon 42 connection harness is shown in
Table 1. A third 24V setting can be added
when a combination of the yellow and white wires, with respect to the blue common wire, is energized. The Eon 42 is designed
to be continuously powered at rated line
voltage (L1- L2) while the signal lines
should be used to turn the motor on/ off.
🎊 🇺🇸 SEE PICS ** **ACTUAL PRODUCT PHOTOGRAPHED! **
If you like this check out my other listings ☺️ on my store
ALWAYS A DEAL
I’m currently Liquidating many businesses, including... this />
🧸🛍🎁🪆
VERA BRADLEY !!!!
Premium Gift shop / Supply Store 📝📒
💡 Lighting retail store
🛠Tire repair shop.
BOSS, MEYER & WESTERN snow plow PARTS STORE
🇺🇸 🎖military surplus
💄 🛍Cosmetic dept. (irregulars)
☀️Tanning Salon💈
⛓🪚🪛🧰hardware store with a full plumbing dept. 🔧🚽🛁
In addition I always have inventory from multiple MLD as as consultants, Such as THIRTY-ONE 👜 / SENEGENCE LIPSENSE 💄 , SCENTSY 🐢🍎, said sqd
PURE ROMANCE 💋,
& CLEVER CONTAINER📝.
Tons of New & “DEAD” stock listed on my store: ALWAYSqs A try to take as many pictures as possible so you can inspect the item before you buy. 😃 * occasionally I may post deadwood or reference (stock) photos. These photos may be trademarks of manufacture.
Thanks
Not all items come as the manufacturer originally packaged. Items may not do any x a have all paperwork, stickers, instructions, etc. Please see pics.
s definitions are foggy. Unless I write ”NEW” (NWT) “NEW WITH TAGS” in the ad Description... assume it’s Open box, (NWOT) “new without tags”or previously owned. Even if the item is “new” it may have Some imperfections- very important to read my description & look at the pictures I take.
’s definition of “new” may be different than yours or mine.
Any “open box” “used” item ; expect minor wear & tear.
* especially small hardware, (Juno products) or things like lampe.
Vera Bradley : most bags are in great shape, some have tags, some do not. Most are “new like” condition, a few have dust or surface wear. Some are irregular Please review reference photos in each ad. VB Purses DRASTICALLY Discounted
FRAGILE ITEMS:
Village houses May need maintenance over time. The accessories are not molds, they are glued and over time will need to be re glued.
Each one of these homes are in their original packaging with styrofoam molds to keep them as safe as possible. I have upgraded my shipping service & will try my best to get the item to you safely & quickly.
* WE HAVE NO AFFILIATION With said manufacturer. To stay vigilant w/TRADEMARK violations..We Want to be clear. Even if item is unopened are NOT CONSULTANTS or sales agents of the manufacturer of this product and we are not otherwise affiliated by the manufacturer - therefore we cannot offer warranties, return policies, or provide the same services provided by the manufacturer or their representatives. This products trademark is owned by its manufacturer.
We do not provide any claims or validation of claims by the manufacturer. We offer these items as-is and without warranties or Services you may receive if purchased from the manufacturer . Because the item may not contain the same warranties or services of a product offered by sellers affiliated with the manufacturer, it is not considered “new” as defined by . However please be assured these products are in good shape and you can refer to my pictures as an extension of the description.
RETURNS; Are very expensive, they Are occasionally accepted on non personal items. The BUYER is responsible for ALL shipping costs involved in a return no matter the reason : In addition allows charging a restocking fee up to 20% if returned . (Item MUST be returned in the same condition it was shipped to you.) After inspection If all is good ; I will then issue a Refund.
SHIPPING: **********^^^^^^DELAYS DURING PANDEMIC PLEASE BE PATIENT W USPS. Anything over 2 lbs. I have decided to ship PRIORITY OR UPS. ^^^^^^^^^^^^^^^^^^^^^^^^^^^I try to ship out as fast as possible, if your in a hurry make sure to pay promptly. Shipping is from MINNESOTA & we try to ship out within a day or 2 of paying for the item. Your tracking # will be sent to you. If there are any delays or concerns after it leaves my possession please contact USPS (or carrier) for more info.
**Note if your are an international buyer, the pandemic 😷 has been blocking some packages. There is a delay using Global Shipping Program please note you may be responsible for any or all special tax, duties or fees on your end. There is ABSOLUTELY NO RETURNING OUTSIDE THE USA. 🤗
**Before you check out on please update your address. I will NOT accept a different address than what is on file. Any “return to sender” fees will be charged back to the buyer. So please confirm your account.
“favorite” my store for future -A-DEAL ZIMMERMAN
Or
www.always-a-deal.com
I appreciate your business! 😍