When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hornady Lock N Load case feeder 3d printed black.
This case feeder will run most calibers except 10mm. So in other words, there are 4 turret holes: the first hole will run 223/300 blackout, the other three will run anything within the two listed diameters. 2nd, (listed 44M/ 45 LC) .357/45 long colt, 3rd. 45/9mm, 4th, 8mm/30-06. Condition is "New" Fully assembled!You will need the following: 2x 1/4"-20 x 3/4" long bolts to mount this to your press (it is your responsibility to make sure you have a newer style press with the mounting holes on the back to accept the two 1/4 X20 bolts to mount a case feeder!) & 3 small 5/8 sheet metal screws if you want to mount the stabilizer to your reloading bench.It takes some time getting the mounting height correct, and the pawls on the Lock-N-Load might need some tweaking. But you could see below the final result is most satisfying! this case feeder dose all calibers including all rifle calibers. These come with a life time warranty, just send pictures of parts and cover the shipping! Please note this unit also comes with 4 tubes.See Video for the working case feeder below.►
