Heat.net

Heat.net Store Home


INKBIRD Digital CO2 Controller Regulator ICC500T NDIR Sensor Probe Greenhouse US For Sale


INKBIRD Digital CO2 Controller Regulator ICC500T NDIR Sensor Probe Greenhouse US
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

INKBIRD Digital CO2 Controller Regulator ICC500T NDIR Sensor Probe Greenhouse US:
$112.52

ICC-500T CO₂ Controller With S01 Sensor

  • Plug and play, simple operation.
  • Dual relays are able to connect with the CO₂regulator or generator and the exhaust fan simultaneously.
  • Dual readouts display the current measured CO₂ concentration and the set CO₂ concentration simultaneously.
  • Programmable high/low CO₂ concentration alarm.
  • Widely applied in the ventilation systems, building control, and HVAC equipment.CO₂ calibration.
  • Package Content: 1x ICC-500T Controller + 1x S01 Sensor + 1x English Manual

Specifications

  1. Input Power: 100~240Vac 50/60Hz 10A MAX
  2. Output Power: 100~240Vac 50/60Hz 10A MAX (two sockets)
  3. Disconnection Method: Type 1B
  4. Pollution Degree: 2
  5. Rated Impulse Voltage: 1500V
  6. Automatic Operation: 6000 cycles
  7. Ambient temperature:
  • Working Environment: room temperature
  • Storage Temperature: 0℃~60℃/32℉~140℉
  • Storage Humidity: 20~80%RH (No freezing or condensation)
  • WORK1 Only for the CO₂ regulator or generator, WORK2 Only for the exhaust fan.

Plug the CO₂ Controller and the sensor

  • When the CO₂ sensor is inserted, the controller will take about 8 seconds to identify.
  • Then the PV window will display 8888 and blink, the SV window will display the CO₂ concentration setting.

Waiting for about 120 seconds

  • After 120 seconds, CO₂ module works stably, and the PV window stops blinking and displays the measured CO₂ concentration.
  • Within 120 seconds, the buttons cannot be operated , the indicators of WORK1 and WORK2 are off, and the WORK1 and WORK2 have no output.

Plug your devices into the socket

  • The controller will automatically identify and convert the CO₂ regulator or generator and the exhaust fan.
  • WORK1 is the output of the CO₂ regulator or generator, and the WORK1 indicator is the WORK1 output status indicator. WORK2 is the output of the exhaust fan, and the WORK2 indicator is the WORK2 output status indicator.

Follow the instructions to finish the setting

  • There are three modes can be set, for more information about setting, please refer to the user manual on the listing page.

ICC-500T CO₂ Controller With S01 Sensor

  • Plug and play, simple operation.
  • Dual relays are able to connect with the CO₂regulator or generator and the exhaust fan simultaneously.
  • Dual readouts display the current measured CO₂ concentration and the set CO₂ concentration simultaneously.
  • Programmable high/low CO₂ concentration alarm.
  • Widely applied in the ventilation systems, building control, and HVAC equipment.CO₂ calibration.
  • Package Content: 1x ICC-500T Controller + 1x S01 Sensor + 1x English Manual

Specifications

  1. Input Power: 100~240Vac 50/60Hz 10A MAX
  2. Output Power: 100~240Vac 50/60Hz 10A MAX (two sockets)
  3. Disconnection Method: Type 1B
  4. Pollution Degree: 2
  5. Rated Impulse Voltage: 1500V
  6. Automatic Operation: 6000 cycles
  7. Ambient temperature:
  • Working Environment: room temperature
  • Storage Temperature: 0℃~60℃/32℉~140℉
  • Storage Humidity: 20~80%RH (No freezing or condensation)
  • WORK1 Only for the CO₂ regulator or generator, WORK2 Only for the exhaust fan.

Plug the CO₂ Controller and the sensor

  • When the CO₂ sensor is inserted, the controller will take about 8 seconds to identify.
  • Then the PV window will display 8888 and blink, the SV window will display the CO₂ concentration setting.

Waiting for about 120 seconds

  • After 120 seconds, CO₂ module works stably, and the PV window stops blinking and displays the measured CO₂ concentration.
  • Within 120 seconds, the buttons cannot be operated , the indicators of WORK1 and WORK2 are off, and the WORK1 and WORK2 have no output.

Plug your devices into the socket

  • The controller will automatically identify and convert the CO₂ regulator or generator and the exhaust fan.
  • WORK1 is the output of the CO₂ regulator or generator, and the WORK1 indicator is the WORK1 output status indicator. WORK2 is the output of the exhaust fan, and the WORK2 indicator is the WORK2 output status indicator.

Follow the instructions to finish the setting

  • There are three modes can be set, for more information about setting, please refer to the user manual on the listing page.

On Jun 13, 2023 at 04:01:48 PDT, seller added the following information:


Buy Now

Other Related Items:



Related Items:

INKBIRD Digital CO2 Controller Regulator ICC500T S01 Probe Greenhouse HVAC US picture

INKBIRD Digital CO2 Controller Regulator ICC500T S01 Probe Greenhouse HVAC US

$114.52



INKBIRD Digital Pool Thermometer Spas Aquarium Tester Bluetooth/Wireless/Gateway picture

INKBIRD Digital Pool Thermometer Spas Aquarium Tester Bluetooth/Wireless/Gateway

$27.99



Inkbird Digital PID Temperature Controller 106VH + K SENSOR + 40A SSR 100-240V  picture

Inkbird Digital PID Temperature Controller 106VH + K SENSOR + 40A SSR 100-240V

$31.81