When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Kperdiem Design Platinum Cure Silicone is a perfect product for making your own silicone molds. This silicone is very strong once cured and is food grade. Additionally, molds made with this silicone work perfectly for epoxy resin.
This kit includes 1/2 lbof part A + 1/2lb of part B for a total of 1 lb!
To use, simply mix part A and part B with a 1:1 ratio by volume, stir thoroughly for 4-6 minutes, and pour. The silicone takes ~12-24 hours to fully cure.
Working Time: 30 min
Demold Time: 6-12 hours
Heat Deflection: 300C
Tensile Strength 5.7 Mpa
Elongation: 500%
Tear Resistance, ppi: 24
Color: Semi-Clear
Hardness: 25A
Viscosity: 1.08g/cm^3
