When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
(1) Sporlan C-032, 1/4" male x male flare filter.
(1) W30-1, Promax 1/8" NPT Male x 1/4" Male Flare inlet adapter
(1) Jumper Hose Approx. 8" Overall length 1/4" x 1/4" Knurl Female Swivel Nuts
(2) 1/4" Caps with retaining straps
(2) Hose end caps to keep hose clean when not in use!
(2) Valve core depressors, if need these can be screwed into the hose ends usuing a standrd valve core tool
(2) Refrigeration valve cores
Robinair FLCK-1 Filter Conversion Kit New
If you owna refrigerant/refrigerant recovery/recycle unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
This "PRE-FILTER" Kit includesa Special jumper hose that lets you use the standard 1/4" male Flare Filters.
The hose alsoallows for some room between the recovery unit inlet and the pre-filter.
Includes everything pictured!
Protect your expensive piece of recovery equipment with this inexpensive kit!!
