When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Save your SAAB ECU !
The best way to save ECU is installSaab 93 ECU saver spacer kit.
This kit will help you to save ECU by overheat. ECU is damage is common problem in SAAB 93. To protect your ECU use this kit to make it life longer.
Kit is suitable toSAAB 93 II (2003-2012)with manual and automatic transmission.
It does not fit to 2.8 V6 and TiD engine.
ECU saver kit is easy to install - max 20 minutes
INSTALLATION ON YOUTUBE:
What is an shield made of?
It is 7mm thick thermal backelite plate forhigh temperature.
In addition, one side of the plate is covered with agolden thermal tape, which reflects thermal radiation. This is protection against high temperature on the engine side.
HIGH QUALITY materials!
The materials used can operate at temperatures up to 150°C !
The most common symptoms of ECU damage are as follows:
- the car does not start, the engine starts with difficulty
- there is little or no effect on the accelerator pedal,
- the engine cuts out during operation,
- the engine runs unevenly, smoke rises from the engine,
- engine dies after "CHECK ENGINE" errors that indicate a faulty ECU:
- P0201, P0202, P0203, P0204, P024
- P0638, P0606, P1681, P1682
- P0691, P0692, P0693
- P0686, P0687
- P0606, P0601
- P0617, P0035, P0628
- P0638, P1523, P2135
