When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Takisawa TAL-460 lathe, in good condition. 18 x 32CC, 5 HP three phase 230/460V, autmatic way oiler, spindle speeds 36-1500, A-6 spindle with 2 inch through hole.
Cuts inch and metric threads with a metric lead screw. Leave the half nut closed for inch threading, follow the chart on thread dial to open and close half nut for metric threading.
4MT tail stock, tail stock is 2 speed, geared 1:1 or 1:5 on the quill, 2 axis DRO, coolant.
Comes with 12 inch 3 jaw scroll chuck, 8 inch 3 jaw scroll chuck, 10 inch 4 jaw independent chuck, Jacobs collet chuck with full set of rubber flex collets (1/16 thru 1-3/8 capacity), back plate for use with fixtures, 4-way tool post, Everede number 3 boring tool holder (up to 2 inch bars), Jacobs 18N Superchuck, live center, sleeve and dead center for spindle, and about 3 gallons of Trim Sol concentrated coolant. Foot brake stops the spindle in a heartbeat, maybe 2.
Free local pick up, will load your truck for free. Thanks for looking.
Updated 12/15/23: Outboard support removed from the listing. It\'s in use on another machine.
