When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Specification:
Material: hole spacing: 73mm (hole diameter: 4mm)
Supply Voltage: AC110V-220V/1500W
Temperature Measurement range: -50℃ to 110℃
Temperature Control Range: -50℃ to 110℃
Control Accuracy: 0.1℃
Display Accuracy: 0.1℃
Measuring Input: NTC10K
Probe Length: 1 Meter
Output Type: Relay Output (Output Switch)
Output Capacity: 10A Instructions:
1.Set the startup temperature:
Press ▲ key once to start the display temperature. Press and hold ▲ key for about 3 seconds to start the temperature digital flashing. Use ▲▼ key to set the desired temperature value.2.Set the stop temperature:
Press the ▼ button to display the stop temperature. Press and hold the ▼ button for about 3 seconds to stop the temperature digital flashing. Use the ▲▼ keys to set the desired temperature value.
3.How to restore the factory settings:
When power is on, press and hold ▲▼ at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.Notice:
1.Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
2.Please allow 1-3CM differs due to manual measurement.
3.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Package Includes:
1 x Digital Temperature Controller
