YONG HENG 30MPA 4500PSI High Pressure Air Compressor PCP Airgun Scuba Air Pump For Sale

FAST SHIPPINGWITHIN 24 HOURS

100% MONEY BACK GUARANTEEBUY WITH CONFIDENCE

American BusinessALL ITEMS IN STOCK IN CALIFORNIA

American STANDARD PRODUCTSQUALITY GUARANTEED

Excellent product at an excellent price,Fast shipping,Highly recommend,A+++

( e***a )

Item was as described and arrived quickly. Great Seller to deal with. Awesome!

( o***f )

I could not be any happier my purchase! and service! Great!!! Thank you

( a***5 )

High Pressure 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc.

Operation instruction:
1. Take out the product; install the hose at the air outlet.(Note: gasket is needed, or air leakage might exist.)
2. Connect 2 cold water pipes and connect them to the water pump. (Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using.)
3. Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose.The blow-down valve is installed at the
drain outlet of the first air chamber block.
4. Immerse the water pump in water and switch on the power.
5. Connect the container need to be inflated, make sure the connection is correct.
6. Screw up the screws of the blow-down valve and pressure relief valve.
7. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur.
8. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure
air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine.

Warning:
1. Please use the power supply according to the parameter table.
2. If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause.
3. The product should be placed at a place that it couldn’ t be touched by children.
4. Please do not use it in moist and flammable place.
5. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
6. Make sure the socket could withstand a currentgreater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
7. Please do not touch the head section after the machine was just being used, so as to not beburnt by high temperature.
8. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely.
9. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder
temperature could be better controlled.
10. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.

• The product has you anticipated outstanding quality and convenience.
• The product is equipped with high pressure rubber hose, to apply to multipurpose use.
• Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles.
• One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Range of application For fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc.
• The pressure value can be set arbitrarily, and it will stop automatically when it reaches the set pressure

• Model : YH-QB01
• Power Rating : 1.8KW
• Inflating Speed : 2800R/Min
• Noise : MAX 85DB
• Air Flow Rate : 40-50L/MIN; 1.5-1.8CFM
• Working Pressure : 100-300BAR; 1500-4500PSI
• Cooling System : Water Cooling
• Compression Stage : Two Stage
• Lubrication Mode : Splash Type
• Material of Cover : Cast Aluminum
• Shout down : Manual stop/automatic stop(for optional)
• Pressure indicate : Gauge
• Filtration : Water/oil separator
• Lubricating oil : ISO VG46 or AW 46
• Air hose connection : 8mm quick connect fitting

• 30Mpa Electric Compressor Pump x 1
• Water Pump x 1
• Water Pipe x 2
• Hose Female x 1
• Air cock x 1
• Pressure relief screw x 2
• Wearing parts x 1
• English Manual x 1

All items are dispatched from our warehouse in HACIENDA HEIGHTS,CA.

We aim to dispatch all products within one working day after yourfull payment is made. If you need to cancel a purchase after the product hasbeen dispatched, please note that the postage fee may not be refundable.Additional postage fees may apply for re-delivery or re-direction requests.

Orders placed on weekend will be shipped within 2 days.

Some products may be dispatched in more than one carton.

International Buyers – Please Note:

Import duties, taxes and charges are not included in the item priceor shipping charges. These charges are the buyer’s responsibility.

UPS/FEDEX: 3-5 business days. | USPS: 2-6 business days. | Truckcompany: 3-8 business days.

We only ship to the Lower 48 states, and we do not ship to FPO, APOor PO Box addresses.

We provide return & refund service within 60 days after the buyerreceives the product. (product kept in original condition, a restocking fee mayapply).

We guarantee the product to be new and free of manufacturer defectsfor 1 year for the original purchaser only.

If you have a problem with the product. Please contact us through and include the original purchase information (i.e. your name , address,email and purchase receipt number).

We will require a picture of the damaged part for verification.

We will repair or replace, at our discretion, any unit determined tobe faulty within the warranty period.

The unit warranty does not cover accidents, develop a fault due tomisuse or improper installation.

The buyer will be liable for the shipping costs associated withwarranty claim.