When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Carburetor kit 1975-1978 Ford Lincoln Mercury 460 Engine Motorcraft 4350 4 BBL
If you are ordering multiples of this item please check before you order to see if the amount needed is on hand. The supply chain has slowed in the past several months.From our stock of over 10,000 carburetor kits!! Questions? Use my messages to contact us.
1975-1978 Ford Cars & Trucks 460 engines 4BBL
1975-1978 Lincoln 460 engines
1975-1978 Mercury 460 engines
We want to send you the correct kit! If you have the carb number, please use message system, do not use email please! Some carburetors have been replaced in service with a different model, so it is a good idea to check the stamped number on the carburetor.These numbers are listed above. If you are uncertain, please give us as much information on your carburetor with your payment so we can double check the application and send the correct kit! If you have the carb number, please use message system, do not use email please!All of theraised letters on the carburetor are production numbersand will not help us or youidentify thecarburetor. Only the numbers that are indented (stamped or on a tag) will help us. If your kit is not listed, contact us for the proper kit.
It is time to refresh that carburetor that is over twenty years old. A tired carburetor can be hard to start, yields poor gas mileage, and slow acceleration. This renew kit brings your carburetor back to original specs and like-new condition! These carburetor renew kits come complete with all of the necessary gaskets, O-rings, pump diaphragm(s), power valve(s), needle, seat(s), and detailed instructions for a complete rebuild.
Just pick up somecarburetor cleaner spray (get the name brand stuff) and pick a clean, well-lit table to disassemble. Most carburetor problems are caused by the buildup of shellac or foreign particles in the passageways. Remove the top or side(s) of the carburetor to expose the float chamber. Get the carburetor cleaner with the small hose attachment to spray into the small passages in the carburetor. After a good cleaning, you are ready to put in the needle, seat, and the accelerator pump. Finish up with fresh gaskets that come in the kit. A little work will yield a like-new carburetor!
In any correspondance please be specific and include our # EE27661
Powered by SixBit's eCommerce Solution
