1986-1987 Grand National T-Type MAFLESS Cold Air Intake kit 3 1/2 \" BLACK For Sale

We designed this sleek one piece intake pipe for the Buick cars. You could even go maf-less or place your MAF in a desired location if you want a Mass air flow sensor. If you are installing a maf make sure to install the kit. mark the pipe. Then cut the pipe. You can use this kit to install the mass air and will match perfectlySilicone couplings Mass Air flow Intake tube Set 3.5\" with Clamps BLACK |

Each pipe is carefully jigged and built 10 at a time to ensure accuracy.

This pipe allows you to run one clean straight shot to your air cleaner, out side below the air dam with true flowing 3.5\". It has Less couplings then other kits. It is essentially a 1 piece 3.5\" aluminum pipe. The kit comes with a 3\" coupling from the TURBO to the pipe. It then evenly follows the radiator support. The bends are there for where your mass air is set up for you to be able to splice in your mass air flow where ever you would like to. Simply decide where you want it. Remove the section of pipe to fit the 3\" mass air in place.

The pipe is stubbed through the radiator support opening where your head light wiring is. There is a 90 that I would suggest attaching first. We put this through the radiator support opening first and then to the turbo. We also supply another 3.5\" stub to go to the supplied air filter.

Notice with a 70 Turbo you do not need an IAC relocation kit. This will save you almost $100!

So here is what you get:

1 - aluminum mandrel bent 1 piece pipe

1 - straight coupling and clamps

1 - 90 and clamps

1 - Air filter extension

1 - 10.25\" long Cotton gauze re-usable filter that adapts from 3\"-3.5\"-4\"

Available in Black, Red and Blue

FREE SHIPPING IN THE DOMESTIC USA