When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ford Shroud Number: F3LE-8146-AC Dual-Speed Guaranteed working.
Original OEM Ford/Lincoln electric radiator cooling fan assembly removed from a custom application.
This is the well-known Lincoln Mark VIII electric fan, commonly used in muscle cars, hot rods, and custom cooling-system conversions for its strong airflow.High-output OEM Ford/Lincoln electric cooling fan, commonly reported to move approximately 4,000–4,500 CFM on high speed. Actual airflow may vary depending on system voltage and installation.
I personally used this fan on my 1969 Pontiac Firebird. It worked extremely well and moved an impressive amount of air.
The fan has now been removed because the vehicle\'s cooling system was changed/upgraded.
Condition & Testing:
- Used OEM Ford/Lincoln assembly
- Tested and working properly
- Both operating speeds/power inputs were tested and function correctly
- Motor runs smoothly
- Fan spins normally
- Very strong airflow
- Original electrical connector and wiring pigtail included
- Ford molded part number F3LE-8146-AC clearly visible on shroud
- Approximately 18\" fan blade diameter
- Overall shroud approximately 20–21\" wide, as shown in photos
IMPORTANT – MODIFIED SHROUD:
The original plastic shroud was trimmed/cut in several areas to fit the radiator in a 1969 Firebird. This modification is clearly visible in the photos and the video.
The fan motor, blade, and electrical components remain intact and functional. The trimming is limited to the plastic mounting/shroud area from the previous custom installation.
Because this is commonly used for custom installations, please carefully review the photos and measurements to determine whether it will fit your application.
The handwritten “GTR-2048” markings were simply identification markings from the previous installation and are not a Ford part number.
Included:
One complete fan assembly exactly as pictured, including fan blade, motor, modified shroud, connector, and attached wiring.
Returns / Warranty
This is a used, modified automotive part that has been tested and is working as described.
No manufacturer warranty is included or implied.
Because fitment in custom applications varies significantly, the buyer is responsible for verifying dimensions, wiring, and suitability before purchase.
Returns, if accepted under the listing terms, must be returned complete and in the same condition as shipped. Damage caused by incorrect wiring, installation, modification, or improper use is not covered.
Installation Note:
This is a high-output electric cooling fan and draws substantial current, especially at startup. The installer should use appropriately sized wiring, relays, fuses/circuit protection, and ensure the vehicle’s charging system can handle the electrical load. Professional installation is recommended.
Please review all photos carefully; the photos are part of the description and show the actual item you will receive.
Guaranteed to work flawlessly!!!
Thanks for looking, and Happy ing!
