When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Specifications
[Application]
The polishing micromotorfits all type of dental laboratory works and some other situations, such asDenture/Jade/Nail/Stone/Wood Polishing and Carving...
Main part:
1.Rated voltage :100-220V（Please set the voltage before using the machine）
2.Out voltage: DC 0 - 32V
3.Power: 65W Max
4.Rated Speed: 1000 - 40000RPM (Max)
5.Plug: US
Suitable for bur size: 2.35mm
Instructions
1.Don't change the turning directions too frequently,otherwise，it will damage the grinding head.
2.Turn the speed control counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
3.After operation put the grinding head on the top of the mail panel.
4.When adjusting the speed, do not press the right switch button, wait for the handle stop and then press.
5.Furlong idle time,please disconnect the source power.
Warranty:
Control box or foot pedal- 1year.
Warranty dose not include bearings or normal wear of bearing, carbon brush，collect chuck, spindle and armature.
Packing list:
1.Control box *1pcs
2.Motor handpiece *1pcs
3.Foot control *1pcs
4.Handpiece stand *1pcs
5.Handpiece holder *1pcs
6.Manual *1pcs
Main part
Rated voltage :110V/60HZ, 220V/50HZ（Please set the voltage before using the machine）
Out voltage: DC 0 - 32V
Power: 65W Max
Rated Speed: 1000 - 40000RPM (Max)
Plug: US
Suitable for bur size: 2.35mm
Instructions:
Don't change the turning directions too frequently,otherwise，it will damage the grinding head.
Turn the speed control counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
After operation put the grinding head on the top of the mail panel.
When adjusting the speed, do not press the right switch button, wait for the handle stop and then press.
Furlong idle time,please disconnect the source power.
Warranty:
Control box or foot pedal- 1year.
Warranty dose not include bearings or normal wear of bearing, carbon brush，collect chuck, spindle and armature.
Packing list:
Control box *1pcs
Motor handpiece *1pcs
Foot control *1pcs
Handpiece stand *1pcs
Handpiece holder *1pcs
Manual *1pcs
