37100-42090 Rear Prop Drive Shaft for 2013-2015 Toyota RAV4 LE Sport Utility
100% tested For reliability and performance.
High Qaulity Steel construction softens shock to driveline components and tires.
Improving traction and lessening breakage.
Vehicle List - Lexus NX200t 2015 L4 2.0L Sport Utility Rear Side
- Lexus NX200t 2016-2017 L4 2.0L Sport Utility Rear Side; AWD
- Lexus NX300h 2015 L4 2.5L Sport Utility Rear Side
- Lexus NX300h 2016-2018 L4 2.5L Sport Utility Rear Side; AWD
- Toyota RAV4 2006-2008 L4 2.4L Sport Utility Rear Side; 4WD
- Toyota RAV4 2009-2019 L4 2.5L Sport Utility Rear Side; 4WD
- Toyota RAV4 2013-2019 L4 2.5L Sport Utility Rear Side; AWD
- Toyota RAV4 2006-2012 V6 3.5L Sport Utility Rear Side; 4WD
Basic Installation StepsOf Drive Shaft
1.Pre-installation Preparation.Lift and secure the vehicle; prepare special tools such as a torque wrench. Clean the surfaces of the drive shaft, flanges and universal joints, and verify that the part model matches the OE parameters.
2.Old Part Removal.Loosen the flange bolts at both ends of the drive shaft in a diagonal sequence, pry it away from the transmission and rear axle flanges, and remove the old drive shaft.
3.Grease Application.Apply high-temperature grease to the spline grooves and universal joint bearings, and coat a thin layer of grease on the oil seal lips to prevent oil leakage.
4.Positioning and Installation.Align the splines of the new drive shaft with the transmission output shaft and push it in, align the flange holes at both ends, and manually screw in all bolts.
5.Bolt Tightening.Tighten the bolts to the torque value specified by the manufacturer in a diagonal sequence with a torque wrench, and check for no axial movement.
6.Protective Parts Installation.Install the dust covers and fasten the clamps tightly; mount the undercarriage guard plate to ensure no interference.
7.Post-installation Testing.Lower the vehicle, start the engine and shift through all gears, and check for smooth operation without abnormalities. Conduct a road test at various speeds to inspect for abnormal noise, vibration and oil that the universal joints at both ends of the drive shaft are in the same plane during installation; otherwise, it will cause rotational vibration.
2.Never start the vehicle before tightening the bolts to prevent the drive shaft from falling off and causing safety accidents.
3.If abnormal noise or vibration occurs after installation, recheck the bolt torque and drive shaft positioning; disassemble and adjust if necessary.
Item SpecificsBrand T-rank autopartsType DriveshaftManufacturer Part Number T160715K01OE/OEM Part Number 37100-42090,37100-42080Placement on Vehicle RearItems Included As the PictureManufacturer Warranty 1 YearFeature Easy InstallationItem Diameter 2.5 inItem Length 90 inVintage Car Part NoCountry/Region of Manufacture UnknownInterchange Part Number 28159Performance Part NoSuperseded Part Number 655000,936722Universal Fitment NoCalifornia Prop 65 Warning YesMaterial SteelSurfase Finish Rust ProtectedFitment Type Direct ReplacementAxle Nut Included NoPackage Contents 1 DriveshaftDrive Type 4WD or AWDGrade Type Standard ReplacementGreaseable Drive Shaft NoOverall Length Adjustable NoDrive Shaft Wall Thickness 0.065 inPackaging Type Box
Payment - Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Shipping - Please note that shipping times on are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
Returns - When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
Contact Us - Customer satisfaction is very important to us and our response rating reflects this satisfaction. If you have any question or concern, please contact us via message.If you don't get response within 1-2 business days, please check your email or My Messages in case your email provider has an overly-aggressive spam filter blocking or my emails.
- Positive response will be left automatically to customers when your payment is cleared.
Warranty - We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
- Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
- Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
- For malfunction products under warranty period, please contact our customer service via Message.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home alternator catalytic converter Drive Shaft Engine Mount Fuel Vapor Charcoal Canister parking sensor rectifier sensor starter steering RackHot Item 11570 Silver Alternator For 2011-2016 Chrysler Town & Country 3.6L 334-2918 USD 88.09 3HP High Torque Mini Starter for SBC BBC Chevy 168 Tooth 323-1459 323-1471 USD 52.15 Center Bearing & Support Drive Shaft For 1995-15 Toyoota Tacoma 2000-15 Tundra USD 16.79 For 1989-1994 Ford Ranger 2.3L Engine Crankshaft Position Sensor F27E6C315BA USD 16.61 3pcs Power Steering Rack and Pinion & Outer Tie Rod for 1988-1992 Toyota Corolla USD 164.10 Excellent DeliveryHelp & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item 26-1690 Hydraulic Steering Rack Fits Lexus ES300 1997-1998 V6 3.0L 51.69 IN USD 165.45 Front Right CV Axle Assembly For Jeep Wrangler JK 2013 2014 2015-2018 All Engine USD 136.54 26-1768 Hydraulic Steering Rack For Acura CL L4 2.2L 1997-1997 53010SV4000 USD 145.94 11Pcs Power Steering Rack & Pinion Assembly for 2002 2003-2005 Dodge Ram 1500 USD 383.48 26-2140 Hydraulic Steering Rack Fits Dodge Ram 1500 2002 V6 3.9L 4WD 54.81 IN USD 209.63 37100-42090 Rear Prop Drive Shaft for 2013-2015 Toyota RAV4 LE Sport Utility Feature
This part may also be known as:Driveshaft Propeller Shaft Assembly
Top performance For long service life
100% tested For reliability and performance.
High Qaulity Steel construction softens shock to driveline components and tires.
High quality after-sales parts
Improving traction and lessening breakage.
Product Details
- Drive Shaft Length (In): 90 in
- Drive Shaft Wall Thickness (In): 0.065 in
- Grade Type: Standard Replacement
- Greaseable Drive Shaft: No
- Overall Length Adjustable: No
- Package Contents: 1 Driveshaft
- Package Quantity: 1
- Packaging Type: Box
- Shaft Diameter: 2.5 in
- Shaft Material: Steel
OE Part Number
Vehicle List - Lexus NX200t 2015 L4 2.0L Sport Utility Rear Side
- Lexus NX200t 2016-2017 L4 2.0L Sport Utility Rear Side; AWD
- Lexus NX300h 2015 L4 2.5L Sport Utility Rear Side
- Lexus NX300h 2016-2018 L4 2.5L Sport Utility Rear Side; AWD
- Toyota RAV4 2006-2008 L4 2.4L Sport Utility Rear Side; 4WD
- Toyota RAV4 2009-2019 L4 2.5L Sport Utility Rear Side; 4WD
- Toyota RAV4 2013-2019 L4 2.5L Sport Utility Rear Side; AWD
- Toyota RAV4 2006-2012 V6 3.5L Sport Utility Rear Side; 4WD
Basic Installation StepsOf Drive Shaft
1.Pre-installation Preparation.Lift and secure the vehicle; prepare special tools such as a torque wrench. Clean the surfaces of the drive shaft, flanges and universal joints, and verify that the part model matches the OE parameters.
2.Old Part Removal.Loosen the flange bolts at both ends of the drive shaft in a diagonal sequence, pry it away from the transmission and rear axle flanges, and remove the old drive shaft.
3.Grease Application.Apply high-temperature grease to the spline grooves and universal joint bearings, and coat a thin layer of grease on the oil seal lips to prevent oil leakage.
4.Positioning and Installation.Align the splines of the new drive shaft with the transmission output shaft and push it in, align the flange holes at both ends, and manually screw in all bolts.
5.Bolt Tightening.Tighten the bolts to the torque value specified by the manufacturer in a diagonal sequence with a torque wrench, and check for no axial movement.
6.Protective Parts Installation.Install the dust covers and fasten the clamps tightly; mount the undercarriage guard plate to ensure no interference.
7.Post-installation Testing.Lower the vehicle, start the engine and shift through all gears, and check for smooth operation without abnormalities. Conduct a road test at various speeds to inspect for abnormal noise, vibration and oil that the universal joints at both ends of the drive shaft are in the same plane during installation; otherwise, it will cause rotational vibration.
2.Never start the vehicle before tightening the bolts to prevent the drive shaft from falling off and causing safety accidents.
3.If abnormal noise or vibration occurs after installation, recheck the bolt torque and drive shaft positioning; disassemble and adjust if necessary.
Item SpecificsBrand :T-rank autopartsType :DriveshaftManufacturer Part Number :T160715K01OE/OEM Part Number :37100-42090,37100-42080Placement on Vehicle :RearItems Included :As the PictureManufacturer Warranty :1 YearFeature :Easy InstallationItem Diameter :2.5 inItem Length :90 inVintage Car Part :NoCountry/Region of Manufacture :UnknownInterchange Part Number :28159Performance Part :NoSuperseded Part Number :655000,936722Universal Fitment :NoCalifornia Prop 65 Warning :YesMaterial :SteelSurfase Finish :Rust ProtectedFitment Type :Direct ReplacementAxle Nut Included :NoPackage Contents :1 DriveshaftDrive Type :4WD or AWDGrade Type :Standard ReplacementGreaseable Drive Shaft :NoOverall Length Adjustable :NoDrive Shaft Wall Thickness :0.065 inPackaging Type : Box
PaymentShippingReturnsContact UsWarranty - Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
- Please note that shipping times on are estimates. Generally our product arrives faster than the estimated times but on occasion that wont be the case. If you need it by a specific day please confirm prior to ordering or upgrade to the next day service. We do not ship product on weekends or holidays
- When returning products to us you must provide: Item Number Buyer ID Your Address Your Phone Number Reason for Return Tracking We only offer refunds if the return is handled within the first 30 days (as per our policy) so any returns after the 30 day period will be via repair or replacement.
- Customer satisfaction is very important to us and our response rating reflects this satisfaction. If you have any question or concern, please contact us via message.If you don't get response within 1-2 business days, please check your email or My Messages in case your email provider has an overly-aggressive spam filter blocking or my emails.
- Positive response will be left automatically to customers when your payment is cleared.
- We fully guarantee customers an exchange or refund within 14 business days of receipt if item DOA (damage on arrival).
- Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
- Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
- For malfunction products under warranty period, please contact our customer service via Message.
All rights reserved.
