When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We offer iron-on and sew-on (no backing) patches. Make sure to pick the correct one! Thanks!
Iron-On Instructions
1. Prepare the Area: Lay the fabric flat on an ironing board or a heat-resistant surface. Make sure the area where you want to place the patch is clean and free of wrinkles.
2. Position the Patch: Place the iron-on patch with the adhesive side down onto the fabric in the desired position. Double-check the orientation to ensure it\'s facing the right way.
3. Set the Iron: Heat your iron to the appropriate temperature for the fabric you\'re using. Typically, a medium to high heat setting works well!
4. Press and Hold: Place a thin cloth (like a pressing cloth or a cotton sheet) over the patch to protect it from direct heat. Press the iron down firmly on the patch for about 20-30 seconds. Avoid moving the iron around to ensure the adhesive bonds properly.
5. Cool and Set: Let the patch cool down for 15-30 minutes before handling. Once it’s cool, check the edges of the patch to make sure it’s securely attached. If needed, repeat the process for any loose edges.
![Baltimore Orioles Throwback Patch | 2.5\](img-large/g/mOUAAOSwLwZnkATv/s-l1600/Baltimore-Orioles-Throwback-Patch-2-5-x-2-5-Iron-O.jpg "Baltimore Orioles Throwback Patch | 2.5\")
