When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CNC 0.8KW Water Cooled Spindle Motor ER11+1.5KW VFD Inverter+65mm Clamp+80W Pump:
$255.90
【USA Stock & UPS/USPS Fast Delivery】 CNC 0.8KW Water Cooled Spindle Motor ER11+1.5KW VFD Inverter+65mm Clamp+80W Pump Package include:1 & 800w ER11 Water Cooled Spindle 65x158mm1& 1000Hz 110v 1.5wVFD/Inverter1 & 65mm Mount Bracket1& 80w Water Pump1 Set ER11 Collets 1 &5m tube - Size:65x158mm (Body diameter:65mm; Length:158mm)
- Speed Ways:Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
- Cooling:Water cooling
- Power Interface: Theair plug marked "1 ","2"," 3","4", "1 ","2 ","3" were connected to inverter(U, V, W), 4 connected inverter ground.
- Power:0.8kw
- Voltage:110vAC(If you need 220v/380v spindle ,please leave message to us,thank you)
- Frequency:0-400Hz
- Speed:0-24000rpm
- Runout Off:0.01mm
- 4pcs bearings
- Water Cooling ER11 collet chunk
- Grease Lubrication
- Main Application:Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal,also can engrave on soft metal surface working.(Please pay more attention, this is wood working spindle, only can used for wood working, please don't use it for steel.If you need steel working,please check the metal spindle,thank you!)
|
