When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Catalytic Converter Set For 2009-2010 Ford F150 5.4L Driver Side& Passenger Material: Stainless Steel
Inlet Gasket: Not Required
Inlet Hardware: None
Inlet Type A: 2 Bolt Loose Flange w/ Female Flare
O2 Sensor Ports: 2
Outlet Gasket: Not Required
Outlet Hardware: Yes
Outlet Type A: 2.50" OD Pipe
Overall Length (IN): 27
Substrate Material: Ceramic
Type: Federal / EPA Material: Stainless Steel
Inlet Gasket: Not Required
Inlet Hardware: None
Inlet Type A: 2 Bolt Loose Flange w/ Female Flare
Inlet Type B: 2.50" ID
O2 Sensor Ports: 2
Outlet Gasket: Not Required
Outlet Hardware: None
Outlet Type A: 2 Bolt Loose Flange w/ Female Flare
Overall Length (IN): 44
Substrate Material: Ceramic
Type: Federal / EPA Direct-Fit
Features:
EPA Compliant
Direct fit for installation onto existing exhaust system. Hardware included. 100% new.
Made from premium quality materials to meet orginal specifications.
Precious metals and large substrate minimize pollutants in your exhaust
Quality inspected and tested - high heat resistance, low emissions and sounds levels
Special design for maximum flow increases the power and performance of your Ford F-150 5.4L V8
2007-2014 Ford Expedition 5.4L V8
2007-2014 Lincoln Navigator 5.4L V8
Package included:
1x Left Catalytic Converter w/Installation Accessories
1x Right Catalytic Converter w/Installation Accessories
Caution:
Converters are designed to last the life of a vehicle. If your converter needs to be replaced it may be due to an emissions error/problem in your engine tuning. Converters that overheat due to engine problems may turn blue or bronze. These problems must be corrected BEFORE installation of a new converter.
Any modifications of any kind will void all warranty coverage for this item.
Warranty is voided if catalytic converter substrate is melted or broken; this is due to an issue with the car itself and not the catalytic converter.
Due to its size and shape it may encounter cosmetic flaws during its stocking and shipping process. The powder coating finish is designed to add shelf life by minimizing surface scratches which may deteriorate over time due to temperatures reached once in use.
Products damaged as a result of abuse, misuse, improper repair, improper installation, alteration or modification will not be covered by the warranty.
O2 sensors must be replaced when you replace the converter or warranty will be void. We have determined that failure of either the front O2 sensor (the front wide-band sensor), also known as an Air-Fuel Ratio Sensor or the read downstream sensor, can trigger a falseP0420code. Both sensors should be replaced with you replaced the converter.
Note:
This product is not legal for sale or use inCalifornia,Colorado,New YorkandMainedue to state emissions regulations.
