When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FOB IS OEM IN GOOD USED CONDITION. PLEASE MATCH YOUR YEAR, MODEL, BUTTONS, FCC# GQ43VT14T (BACK OF FOB). INSTRUCTIONS ARE IN THE DESCRIPTION OF THE AD. PLEASE ASK ANY QUESTIONS!!DescriptionWorks on the Following Models:Toyota Matrix 2003-2008
Pontiac Vibe 2003-2008Buttons:Lock
Unlock
Hatch or Hatch Glass
Panic (on Back)FCC ID:GQ43VT14TP/N:89742-02010
88969657
TRW 88LP0065
RSS-210Continental:CAN: 1470 102 849
MEX: RCPTR3002-025Frequency:315 MHzBattery:2032Condition:OEM
How to Program a 2005 Toyota Matrix Keyless Entry Remote Fob Smart Key
Step by Step How to Programming Instructions:
1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.
