Eibach Pro-Lift +1.2 Front Springs Fits: 24-26 INEOS Grenadier E30-34-001-13-22 For Sale

Ditch the nose-down factory rake on your INEOS Grenadier and clear larger off-road tires without compromising suspension articulation or over-stressing your ball joints with cheap strut spacers. Manufactured in the USA by Eibach, these Pro-Lift-Kit Front Axle coil springs are engineered with championship off-road race metallurgy to deliver a true +1.2-inch (30mm) front leveling lift while maintaining factory-plus on-road stability.

CRITICAL HARDWARE & BOX INVENTORY NOTE:

• The outer factory shipping carton is labeled E30-34-001-13-22 (Box 1 of 2).

• This listing is for BOX 1 OF 2 ONLY (F341-34-001-01-FA), which contains the complete matched pair of (2) Front Axle (FA) Lift Springs (stamped 31 34 001 01 FA on both coils).

• Box 2 of 2 (F341-34-001-13-RA rear springs) is NOT included. Because the full -22 kit simply pairs these +1.2\" front leveling springs with +0\" rear springs, Box 1 by itself functions as a complete 2-piece +1.2\" Front Leveling Kit (equivalent to Eibach standalone front kit E30-34-001-13-20).

Both springs are in unmounted open-box condition with the Royal Silver heavy-duty powder coat, pre-installed black lower coil isolator sleeves, Eibach decals, and factory paperwork intact. One coil has minor factory ink smudge on the printed part number (31 34 001 01 FA), while the second coil\'s stamp is razor-sharp. This is an open-box steal that saves you nearly $200 off retail. Perfect for your next build.

TECHNICAL SPECS & FITMENT:

• Fits: 2024-2026 INEOS Grenadier SUV (3.0L 6-Cylinder Turbo 4WD, Gas & Diesel, Non-Winch Front)

• Lift Spec: +1.2 Inches (+30mm) Front Axle Leveling Lift

• Spring Hardware Specs: 15.5mm (0.61\") Wire Diameter | 525mm (20.67\") Free Length | 8.8 Coils

• OEM / Interchange Part #: Box 1 P/N: F341-34-001-01-FA | Coil Stamping: 31 34 001 01 FA | Master Kit P/N: E30-34-001-13-22 (Box 1 Only) | Equivalent 2-Spring Front Kit P/N: E30-34-001-13-20

• Included in Box: (2) Front Coil Springs with lower isolator sleeves, (2) Eibach stickers, and factory documentation inside the original Eibach carton.

INSTALLATION & TECH NOTES:

• Compatible with factory OEM dampers or Eibach Pro-Truck Reservoir Shocks; always use a heavy-duty cage-style coil spring compressor or proper axle droop procedure when swapping solid-axle coil springs.

• Clock the lower black coil isolator sleeves firmly against the front axle lower spring perch stops, and torque all control arm and track bar hardware with the vehicle\'s full weight resting on the ground to prevent bushing bind.

• Perform a front-end alignment and recenter the steering wheel via the drag link after raising the front ride height by 1.2 inches.

SHIPPING & LOCAL PICKUP:

• Fast 1-Day Handling.

• Pickup in Chandler at Ray and McQueen. Cash, Zelle, Venmo.