For 03 04 Corolla CE LE S Type R Style Front Bumper Chin Lip Spoiler Body Kit For Sale

Autumnwish Auto Art SoCal Aero / Body Kit Specialist 1 Business Day Handling 30 Days Returns Fast Message Support Type R Style Front Bumper Lip – PU (Unpainted)

Refresh the front end with a clean OEM+ look. Durable flexible PU for daily-driven and show cars.

One-piece flexible PU design: fewer seams/joints for a cleaner, more continuous look after test-fit — and more forgiving for real-world daily driving than rigid plastics. Quick Fitment Check (We Can Help)

This lip is designed for2003-2004 Toyota Corolla with OEM front bumper. If you’re not 100% sure your bumper is OEM, message us a quick photo — we reply fast and will help confirm fitment.

Included

(1) One-piece front bumper lip (PU, unpainted)

Mounting accessories (hardware/tape) only if shown in the listing photos (may vary by batch)

Product Details

• 100% brand new — never installed, direct from Autumnwish Auto Art
• Type-R style front bumper lip for a clean, aggressive OEM+ look
• Material: Flexible PU (Polyurethane) — more durable and impact-resistant than fiberglass
• Finish: Unpainted / raw PU — prep + paint required for color match
• Designed to follow OEM bumper lines for a flush, factory-like appearance
• Lightweight and strong — ideal for daily-driven and show cars
• One-piece PU design — fewer seams/joints for a cleaner look after test-fit
• Flexible for daily use — helps reduce the chance of cracking from minor bumps/driveway contact vs rigid plastics

Unpainted PU Notes / Arrival Shape This is an unpainted raw PU part. Minor surface texture, light molding lines, small waves, or minor handling marks can be normal and are typically addressed during prep / paint. Always TEST-FIT before paint.

• PU is flexible by design and may arrive in a gentle rounded or compact-packed shape after transit
• A rounded, curved, or temporarily compressed arrival shape is normal for flexible PU and does not mean the item is damaged
• After unpacking, lay the lip flat in a warm area or under sunlight for 1–4 hours
• Gentle warm air from a hair dryer on low heat may help the PU material relax
• Do not use high heat or force while cold
• Please review the gallery image titled “UNPACK • RELAX • TEST FIT” for a quick visual reference before installation

Finish Note (Unpainted Raw PU): Final finish (gloss / satin / matte) depends on your prep & paint choice for your desired look. Tools & Materials (Not Included)

• 3M automotive double-sided tape + adhesion promoter (recommended)
• Screws/bolts + drill bits (if needed)
• Cleaner (soap/alcohol), sandpaper, primer, and paint if finishing

Shipping & Arrival Checklist (Fastest Resolution)

• After opening, take clear photos of the item and packaging
• Message us with photos — we can resolve issues much faster this way

Installation Prep (Recommended)

• Always TEST-FIT before paint, drilling, trimming, or final installation
• Drilling is required in most cases (mounts to the bottom of the OEM front bumper)
• Surface must be clean and dry for best adhesion
• Screws/bolts may be used for reinforcement depending on bumper condition
• One-piece tip: mark mounting points during test-fit, then install evenly from center outward for best alignment

Installation (Important)

• Installation manual is not included — this is a DIY / professional installation item
• Drilling is required in most cases (mounts to the bottom of the OEM front bumper)
• Always TEST-FIT on the vehicle before any paint / drill / cut / sand
• Prep work is required for best paint results (clean, sand, prime, paint)
• Some trimming/adjustment may be necessary depending on bumper condition and prior repair history
• Professional body shop installation is highly recommended

Final Notes / Responsibility

Vehicle photos are for visual reference only. Actual fitment depends on correct bumper variant and bumper condition. Repairs, bodywork, aftermarket bumpers, or prior modifications may affect fit. Damage during installation is the buyer/installer’s responsibility.

Return Note (Policy & Item Condition)

returns are accepted within the allowed return window. Please test-fit before paint or drilling. Returned items must be in the same condition as received. If an item is returned painted, drilled, cut, installed, sanded, modified, or damaged by installation attempts, it may not be resalable and may be subject to a deduction for loss in value, as allowed by policy. If you have any fitment questions, message us first — we’ll help you confirm before you start.