When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mode 2: After Starting the Vehicle, Automatically Turn on the Light and Change the Light Color Every 5 Seconds!
Mode 3: After Starting the Vehicle, Automatically Turn on the Light and Change the Light Color Every 5 Minutes!
Mode 4: Restore the Original Function. The Product Does Not Work. You Need to Manually Switch the Light Color.
2. Installation: original car docking [plug]]
3. Features: the vehicle starts automatically after being powered on, increasing the atmosphere inside the vehicle. Automatically change the color once every 5 seconds
4. The installation picture and text are described below. Follow the installation steps to install!
For more usage, please consult the merchant.
Before installation
Close the door, the light will be off, and the atmosphere will be lost instantly.
After installation
The car will be on immediately after starting, and there is no need to manually open it, and the grade will rise instantly.
Automatic switching of multiple colors increases the atmosphere in the car.
After Starting the Vehicle, Press the Color Button of Air-Conditioning Panel for More than 3 Seconds:
Operate Within 3 Seconds, Change the Color Once, and Enter the First Mode
Operate Within 3 Seconds, Change the Color Twice, and Enter the Second Mode
Operate Within 3 Seconds, Change the Color Three Times, and Enter the Third Mode
The Fourth Mode Setting Method:
After Starting the Vehicle, Press the Button of the Room of Air-Conditioning Panel for More than 3 Seconds:
1 If the Light Is Not on, It Means That the Factory Setting Mode Is Restored and the Product Will Not Work.
2 If the Light Is on Automatically, the Product Enters the Working Mode (One of the 123 Modes Is Entered)
Start the car to light up, no need to manually open
Plug-and-play, lossless installation, original car docking (plug-in)
Installation procedure of constant light module (monochrome)
Step 1: pry the second row air-conditioning panel of the original car and remove it
Step 2: Pull out the (plug) of the original car interface
Step 3: connect the interface of one end of this product to the interface of the original car
Step 4: connect the interface on the other end of the product to air-conditioning panel
Step 5: install the removed panel back to its original position
Step 6: installation completed
If you don\'t understand, there are corresponding numbers in the picture below.
