For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050 For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050:
$264.95

Turbo Model: TD04L6 TD04 TD04L6-13WDT-7.0T

Turbo Part Number: 28231-2GTA1 282312GTA1 28231 2GTA1

OEM Number: 90124-01050 9012401050 90124 01050

Engine:DOHC-TCIGDI 2.0L Theta 2 2015- Turbo

For Hyundai Sonata Santa Fe Optima Sorrento Sportage 2.0L

For Hyundai Sonata 2015-2018 DOHC-TCI/GDI

For Hyundai Santa Fe 2016-2018 DOHC-TCI/GDI

For Hyundai Optima 2016-2018 2.0L-Theta 2

For Sorrento 2015-2018 2.0L-Theta 2

For Sportage 2016-2018 2.0L-Theta 2

The installation steps of the turbocharger are as follows:

For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050

Turbo Model: TD04L6 TD04 TD04L6-13WDT-7.0T

Turbo Part Number: 28231-2GTA1 282312GTA1 28231 2GTA1

OEM Number: 90124-01050 9012401050 90124 01050

Engine:DOHC-TCIGDI 2.0L Theta 2 2015- Turbo

For Hyundai Sonata Santa Fe Optima Sorrento Sportage 2.0L

For Hyundai Sonata 2015-2018 DOHC-TCI/GDI

For Hyundai Santa Fe 2016-2018 DOHC-TCI/GDI

For Hyundai Optima 2016-2018 2.0L-Theta 2

For Sorrento 2015-2018 2.0L-Theta 2

For Sportage 2016-2018 2.0L-Theta 2

The installation steps of the turbocharger are as 1 : Before Replacing A Turbo

1.1

It is important to conduct a thorough diagnostic check of the engine system to determine if the “fault” is actually the turbocharger.

1.2

If the engine diagnostic check does not uncover any obvious cause, make sure that an extensive trouble shooting analysis is 2 :Turbo the part number to ensure that it is the right one for the engine. If in doubt, check with us.

2.2

It is important that during the whole installation process, you prevent dirt or debris from entering any part of the that correct gaskets are used.
Important Note: Do not use liquid gasket or sealants, particularly for the oil inlet or outlet since excessive material may enter the turbo, reducing or stopping oil flow.

2.4

It is recommended that you use new air, oil and fuel filters and clean engine oil to the engine or vehicle maker’s installing the turbo, ensure that all air hoses connected to the turbo are totally clean and show no sign of any damage.

2.6

The air filter and its housing must be completely clean and free from any the engine breather system and ensure that it functions properly.

2.8

Remove any old gasket material from the exhaust manifold and pipe.

The surfaces of the flange must be clean and have no the turbo onto manifold or engine block using the correct new gasket or O ring, and then reconnect the exhaust pipe.

Tighten all nuts and bolts.

2.10

Next, install oil drain line to the turbocharger.

we recommend fitting a new oil inlet pipe when installing the new new engine oil into the oil inlet hole of the fit the new oil feed inlet and outlet air hoses to turbocharger compressor housing.

Make sure that the connections are airtight and hose clamps are correctly tightened.

2.14
Crank the engine for 10 - 15 seconds without starting the engine.

If possible, disable the fuelling/ignition or use compressiontest mode to allow this.

This helps to prime the oil feed to the turbocharger by filling the oil pressure lines, oil filter and turbo with oil before start-up.

Important note: as soon as the engine starts, the turbo willrun at high speed and a lack of lubrication in these vital first few seconds can destroy a brand new start the engine, and let it idle for 3 to 4 minutes to allow for proper inspection of oil, gas and the engine and re-check engine oil level.
Oil level should be between the minimum and maximum mark on the dipstick.

It is important to make surethat oil level is not above the point where turbo oil drain pipe connects to the engine

or this may lead to oil leakage from the turbo into the inlet and exhaust systems.

Item SpecificsBrand ECCPPType TurbochargerFeatures IndividualUniversal Fitment NoColor SilverManufacturer Part Number EC161754810312CPOE/OEM Part Number 28231-2GTA1 90124-01050Performance Part YesVintage Part NoManufacturer Warranty 1 YearFinish MatteInterchange Part Number 90124-01050Superseded Part Number 282312GTA1Fitment Type Direct ReplacementEngine Type TurbochargedCustom Bundle NoModified Item NoPlacement on Vehicle FrontPackage Contents As the picture showsOE Spec or Performance/Custom OE SpecNotes Please Add Engine Oil Before UseInstruction Included NoEngine Theta 2Turbo Model TD04L6 Item SpecificsBrand ECCPPType TurbochargerFeatures IndividualUniversal Fitment NoColor SilverManufacturer Part Number EC161754810312CPOE/OEM Part Number 28231-2GTA1 90124-01050Performance Part YesVintage Part NoManufacturer Warranty 1 YearFinish MatteInterchange Part Number 90124-01050Superseded Part Number 282312GTA1Fitment Type Direct ReplacementEngine Type TurbochargedCustom Bundle NoModified Item NoPlacement on Vehicle FrontPackage Contents As the picture showsOE Spec or Performance/Custom OE SpecNotes Please Add Engine Oil Before UseInstruction Included NoEngine Theta 2Turbo Model TD04L6

We accept multiple payment methods

Turbo Model: TD04L6 TD04 TD04L6-13WDT-7.0T

Turbo Part Number: 28231-2GTA1 282312GTA1 28231 2GTA1

OEM Number: 90124-01050 9012401050 90124 01050

Engine:DOHC-TCIGDI 2.0L Theta 2 2015- Turbo

For Hyundai Sonata Santa Fe Optima Sorrento Sportage 2.0L

For Hyundai Sonata 2015-2018 DOHC-TCI/GDI

For Hyundai Santa Fe 2016-2018 DOHC-TCI/GDI

For Hyundai Optima 2016-2018 2.0L-Theta 2

For Sorrento 2015-2018 2.0L-Theta 2

For Sportage 2016-2018 2.0L-Theta 2

The installation steps of the turbocharger are as 1 : Before Replacing A Turbo

1.1

It is important to conduct a thorough diagnostic check of the engine system to determine if the “fault” is actually the turbocharger.

1.2

2.2

2.4

2.6

The air filter and its housing must be completely clean and free from any the engine breather system and ensure that it functions properly.

2.8

Remove any old gasket material from the exhaust manifold and pipe.

The surfaces of the flange must be clean and have no the turbo onto manifold or engine block using the correct new gasket or O ring, and then reconnect the exhaust pipe.

Tighten all nuts and bolts.

2.10

Next, install oil drain line to the turbocharger.

we recommend fitting a new oil inlet pipe when installing the new new engine oil into the oil inlet hole of the fit the new oil feed inlet and outlet air hoses to turbocharger compressor housing.

Make sure that the connections are airtight and hose clamps are correctly tightened.

2.14
Crank the engine for 10 - 15 seconds without starting the engine.

If possible, disable the fuelling/ignition or use compressiontest mode to allow this.

This helps to prime the oil feed to the turbocharger by filling the oil pressure lines, oil filter and turbo with oil before start-up.

It is important to make surethat oil level is not above the point where turbo oil drain pipe connects to the engine

or this may lead to oil leakage from the turbo into the inlet and exhaust systems.

We accept multiple payment methods

For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050 For Sale

For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050: $264.95

Other Related Items:

For 2015-2018 Hyundai Sonata Kia Optima 2.0L TD04 TD04L6 Turbo 9012401050:
$264.95