GI Joe Wall Mount For Cobra Rattler (1984, 2008) or 1988 Tiger Rat For Sale

This is for the wall mount only, no planes or figures included.
This listing is for an easy to install multi directional wall mount system for displaying a variety of G.I. Joe planes based on the 1984 and 2008 Cobra Rattler molds:
Rattler (1984)Tiger Rat (1988)A-10 Thunderbolt (1997)Rattler w/ Sound Attack (2002) - Sound attack module needs to be removed.Rattler (2008)Tiger Rat (2009)Autobot Powerglide (2016)
A self-drilling drywall anchor and screw are provided. No drilling necessary, unless you are on a stud, then pre-drill with a 3/16" bit. You just screw the anchor into the drywall.
See the installation video here:https://youtu.be/PDfUxJYuC8Q
To Install:Remove the 2 belly missiles from the Rattler. Remove the 2 magnetic latches from the mount. Place the mount over the missile supports, with the narrower end facing forward. Install the two magnetic latches.Attach the acrylic bracket to the wall with the included anchor and screw. Tighten just enough so that the bracket can swivel with some effort.Line the locking nut of the mount up with the hole in the bracket, and install the screw. Tighten just enough that you can position the plane to your preference, then tighten the screw.
Make sure the screw is engaged in the metal nut in the T-nut.
Visit my store for other hard to find vintage Star Wars parts, repair kits, and vehicle wall mounting hangers!
I have the following G.I. Joe wall mounts Collector:I specialize in designing and creating high-quality 3D printed parts for vintage Star Wars (and some other!) toys. My expertise lies in crafting custom wall-mount brackets to securely and stylishly display vintage vehicles. Additionally, I offer a range of reproduction parts designed to closely resemble the originals while being affordable and practical for display purposes. My goal is to provide accessible solutions that enhance the look of your vintage collection.