GODIAG GT100 PLUS GPT ENET DOIP Auto Tool Test Platform for CAS1/CAS2/ CAS3 SER For Sale

Title GODIAG GT100 PLUS GPT ENET DOIP Auto Tool Test Platform for CAS1/CAS2/ CAS3 SER

PRODUCT DESCRIPTION

International Buyers - Please Note:

This item located in United States and only ship to United States.

If you need to return the item for some reasons, pls contact us via message at the fist time, we will try our best to help you andarrange the return for you. Pls do not send back directly without permission.Thank you!!!

ITEM 1: GODIAG GT100 PLUS GPT ENET DOIP 24V-12V AUTO TOOLS OBD II Break Out Box E-C-U Connector



GODIAG GT100 PLUS GPT Introduction:GODIAG GT100 PLUS GPT is a testing platform for OBDII protocol communication detection and E-C-U maintenance / diagnosis / progarmming / coding. GT100 PLUS has a voltage and current display which is convenient for maintenance engineers to judge the current working status of E-C-U.It can convert the car OBD2 interface into 16 pin for signal detection. It can be connected to the single modules or multiple modules of the vehicle. It can also be connected with any diagnostic tool to tell whether the car communication is good or not.

It supports the 24v to 12v voltage conversion, DOIP-ENET communication andGPT to read and write E-C-U data.

It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically loc-ked, the key remote control fails and the fault light turns on.

The product uses CANH and CANL shielded twisted cables, which can resist electromagnetic interference and make communication more stable.

Product Function Comparison Among SO537-C(GT100 Plus), SO537-B(GT100+) and SO537(GT100)
ModelSO537-C(GT100 Plus GPT)SO537-B(GT100+)SO537(GT100)24v-12v voltage conversion√××DOIP ENET Diagnostics√××GPT connection method to read and write ECU√××Connect CAS1/CAS2 Mech-Key Test Platform And CAS2 CAS3 SER Semi Smart Test Platform airbag 100K CANBUS communication√××Voltage and current value display function√√×Pin 1, 9, 3, 11 12, 13, 8Display CANBUS communication.√√×Pin 1, 9, 3, 11 12, 13, 8Display K-Line Pwm Vpw+ KWP 2000 protocol communication.√√√PIN2. 10 VPW PIN6.14 CANBUS PIN 7.15 k-line√√√Check whether tools can send communication signals.√√√Program key for VW, Porsche, Mitsubishi etc with all keys lost√√√Communicate with a single E-C-U on bench√√√Replace the auxiliary power supply for the battery√√√Convert the OBD1 port of special truck to the standard OBD2√√√Test whether the programmed key works with CAS4√√√Work with BMW FEM/BDC Progarmming Test Platform√√√

Product Functions:1.Use GPT to read and write E-C-U with devices (such as PC-MFLA-SH, K-E-S-SV2)Support GPT to read and write data without disassembling the E-C-U.
Supports OBD2 BENCH [CAN bus & K-Line]
Supports GPT BOOT CNF1
2. Check OBDII diagnostic interface Communication Status and Display Voltage

By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100 PLUS GPT's LED will indicate whether the OBDII diagnostic interface has a good communication with the car. It monitors the voltage of vehicle's OBDII interface and display it in real time. If it is less than 11V, please stop the diagnosis and programming to avoid data loss/ module locked/ the vehicle being unable to start. Itsupports OBD2 BENCH full protocols.

1. Manufacturer custom2. SJE1850 wire3. Manufacturer custom4. Power grounding5. Signal grounding6. SAEJ2284《CAN》high7. ISO9141-2&iso, DIS4230-4K wire8. Manufacturer custom9. Manufacturer custom10. SJE1850 wire《bus->11. Manufacturer custom12. Manufacturer custom13. Manufacturer custom14. SAEJ2284《CAN》low15. ISO9141-2 & ISO/DIS 4230-4L wire16. Car battery positive3. Support DOIP-ENET DiagnosticsSupport DOIP-ENET communicationSupport diagnostic progarmming and coding for BMW Benz, for V-ol-ksw-a-gen, Audi and other vehicles that support DOIP protocol. [no software is provided.]Can be used for diagnostic progarmming and coding of forLand Rover, for VOLVO, and Geely vehicles that support DOIP communication. [no software is provided.]
4. 24V to 12V Voltage ConversionConvert the 24v voltage of the diagnostic interface of heavy trucks, light trucks, pickups, etc. into 12v voltage that can be used by diagnostic equipment.

5.) Connect with A-i-r-b-a-g E-C-U


6.) Used to check whether the diagnostic / progarmming / coding tool can send communication signals.

7.) E-C-U connection: single module connectionGODIAG GT100 PLUS GPT, connected to a single E-C-U module, is convenient for a user to do the single-module diagnosis and progarmming.

8.) GT100 PLUS GPT progarm ke-y for VW, Porsche, Mitsubishi etc with all keys lost - activate the instrument or immobilizer module.
A. To progarm for V.W 4th generation / 5th generation Lost all ke-ys (for example: new A6L Touareg A4 Q5 A7), please use GT100 PLUS GPT to short-circuit banana connector PIN 16----PIN 1 to lit up the dashboard, aft that use the ke-y progarmmer tool to connect with the female adapter of GT100 PLUS GPT+ for data collection. Some vehicle dashboards won't be lit up, but data can also be collected, for example: A6L Q7.B. To replace the engine E-C-U of for Toyota or to use some ke-y progarmmer to progarm for Toyota when all ke-ys lost, it needs to short-circuit PIN13-PIN4C. To progarm Mitsubishi ke-y with all ke-ys lost or to set OBDII when all remote ke-y lost, please short-circuit PIN1-PIN4.D. To progarm Porsche Cayenne ke-y with all ke-ys lost or with all remote ke-y lost, please short circuit PIN3-PIN7.
9.) Voltage and Current Value Display functionOn bench connect the E-C-U module by using the banana connector or db25 dedicated E-C-U interface, and Godiag GT100 Plus GPT will display the voltage / current value.The user can intuitively see the current status of the ECU. There is no current display or The actual displayed current is inconsistent with the engineer's expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the E-C-U may be broken, so there is no need to perform diagnostic communication and can directly repair the E-C-U.If it shows too much current, then you can also determine if the cable is wrongly connected or the E-C-U is broken.

10.) GT100 PLUS GPT Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol.GT100 PLUS GPT can only display K- Line Pwm Vpw+ KWP 2000 protocol. GT100 PLUS GPT will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.
11.) Quickly communicate with a single ECU on bench by connecting with the E-C-U diagnostic / progarmming tool.[Which allow the engineers or technicians to complete the job on bench, also keep away the risk of data loss in other modules when directly testing on the vehicle.]
12.)Multiple vehicle E-C-U module connecting.[It’s aimed at solving the problem of engineers and technicians who need to connect multiple E-C-U during progarmming a module, such as connecting to multiple E-C-U modules for ke-y progarmming]
13.) Replace the auxiliary power supply for the battery- uninterruptible power supply connecting mode. [Since there’s failure or missing antitheft remote control data of some vehicles when the battery is dismantled, the auxiliary power supply aims at supplying power to the vehicle through GT100 PLUS GPT before replacing the battery to sustain the power supply to the vehicle. It guarantees the vehicle E-C-U is power connected during repl-acement of the battery.]14.) The OBD2 cable ofGT100 PLUS GPT is as long as 1.4 meters, which will solve the problem that the diagnostic tool cable is not long enough or the vehicle diagnostic port is too narrow to connect.Please connectGT100 PLUS GPT first, turn on the power switch and you will see the voltage on the screen which can tell whether the power supply of the vehicle is normal. [Which keep away the risk of burning out the diagnostic & progarmming tool due to the modified vehicle OBD2 port]15.) For old OBD1 vehicles or special diagnostic port, please connect GT100 PLUS GPT through the banana plug and DB25 jumper.The OBD1 diagnostic port or special diagnostic port can be transferred to the standard OBD2 diagnostic port.16.) GT100 PLUS GPT will convert the OBD1 port of special truck to the standard OBD2 diagnostic port according to the protocol.
17.) Work with CAS1/CAS2 Mech-Key Test Platform
18.)Work with CAS2 CAS3 SER Semi Smart Test Platform
19.) For BMW-CAS4/CAS4+Progarmming Test Platform, it’s used to test whether the progarmmed ke-y works with CAS4 normally
20.)For BMW FEM/BDC Programming Test Platform21.) More connectors and dedicated modules are under development, please wait...




Product portOBDIIWorking voltageDC 9V-24VWork and power0.5-0.6WAdapter powerInput AC100v-240v, Output DC12.5V 2.5AOperating temperature range-20 to 70 °C ( -4 to 158 °F )Storage temperature range-40 to 85 °C ( -40 to 185 °F )DimensionL: 23cm, W: 18cm, H: 7cm
Package includes:1pc x Host
1pc x GPT connecting cable
1pc x Ethernet cable1pc x OBD 2-in-1 extension cable1pc x Colored jumper cable1pc x Power supply 12V1pc x Resistance 120 ohm6pcs x Banana plug24pcs x Wire accessories, Dupont 2.54mm connector female pins
1pc x Manual

ITEM 2:GODIAG Fit For BMW CAS1/CAS2 Mech-Key Test Platform Detect CAS & Key Synchronization Solder-free Matching CAS Data Read, Write and Progarm

GODIAG BMW CAS1/CAS2 Mech-Key Test Platform is a dedicated device developed for BMW lo-cksmiths, maintenance engineers and CAS1 / CAS2 progarmming engineers. It can cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. Please note that this product is only suitable for mechanical keys.

Note:GODIAG BMW CAS1/CAS2 Mech-Key Test Platform does not supportsemi-intelligent smart key CAS2 and cannot be used with diagnostic equipment or with GT100, GT100+. If necessary, please purchase a semi-intelligent smart key detection platform for the semi-intelligent smart key CAS2.

Product Features:

1. Detect CAS and key synchronization

2. Solder-free matching CAS1/CAS2 mechanical key

3. CAS data reading, writing and progarmming

4. All keys lost /adding keys matching

5. CAS key data backup

6. CAS module function judgment

Product Functions:

1.Check if the CAS1/CAS2 module and mechanical keys are synchronized.

2.Cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc.,to perform all key lost matching or key addition operations.

3.CAS1/CAS2 module diagnostics

4.CAS1 / CAS2 module progarmming

Synchronous detection of module and key:

Check whether the CAS2 module and mechanical key can be synchronized:

Step 1:Connect the CAS2 module according to the connection diagram

Step 2:Put the key into the key sensing area

Step 3:Connect the power supply.

Step 4:Press the start switch (press the start switch once to turn on the CAS power and automatically detect whether the key and CAS are synchronized, press it again to turn off the CAS power and turn off the detection).

Synchronization judgment method: when the detection start switch is pressed, the Power indicator light will light up. If the key is synchronized with CAS2, the CAS module key induction coil indicator light will flash regularly. If it is an unsynchronized key, the key induction coil indicator light will only flash quickly for 2 seconds. [If the key is synchronized with the CAS module, the IMMO synchronization detection indicator light will light up and the internal buzzer of the machine will sound. If the key is not synchronized with the CAS module, the IMMO synchronization detection indicator light will not light up and the internal buzzer of the machine will not sound.]

Step 5:Press and hold the analog start/stop button, the IMMO synchronization detection indicator light will go out after 3 seconds. The INDUC sensor indicator light also goes out. After releasing, the IMMO synchronization detection indicator light will light up. The INDUC sensor indicator light flashes.

CAS1 module and key synchronization detection:

1.Connect the device according to the connection diagram. Please use 12V 2.5A for power supply, otherwise the CAS1 module cannot be driven. [Do not connect the CAS2 module]

2.Press the start switch [you can see the START-STOP indicator light on the CAS lights up]

3.Insert the key into CAS1

4.Press the CAS1 key. If the key is synchronized with the CAS1 module, the CAS1 key will be lo-cked. It will automatically exits if the key is not synchronized.

CAS2 mechanical key module key progarmming and module progarmming identification diagnostic connection demonstration:

The following uses Xhorse vvdi2 device to perform BMW CAS2 mechanical key progarmming and matching operations:

1.Connect the CAS2 mechanical key module and key progarmming diagnostic equipment according to the connection diagram. Press the start button to provide power to CAS2.

2.Select “key learn—CAS/EWS Information---Connect-- Read EEPROM”. [Note: Take away the key and do not perform synchronization detection between the key and the CAS2 module before connecting to read data. Just press the start button to power the CAS module. If the CAS module detects a synchronized key, then the connected device cannot read the data. ]

Save to File...

If you want to read the CAS mileage or modify the CAS mileage, please operate the corresponding menu“Read KM”.It can also read CAS code-DME.

3.Key progarmming steps: select “key learn—CAS Key Learn ---Connect” , select “Get Key Info” and “Save Key Info”.

4. Select an unused key position, be sure to select the “prepare dealer key with Progarmmer” menu, and use the VVDI2 key Progarmmer to generate the key. If the key is placed in the key sensing area of the GODIAG BMW CAS1/CAS2 Mech-Key Test Platform, the dealer key will not be generated.


5. After progarmming the dealer key, place the key into the Godiag BMW CAS1/CAS2 Mech-Key Test Platform sensor port for testing. For test steps, please refer to module and key synchronization detection.If the new key detection is out of sync, please synchronize CAS and DME or synchronize CAS and ELV. Reconnect the device and module and press the button‘Check the start switch’ If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV” for synchronization operation. [When performing synchronization, the key must be placed in the key sensing progarmming area of the VVDI2 device.]

The following uses the Xhorse vvdi2 device to perform the BMW CAS1 key progarmming and matching operation:

1.Connect the CAS1 module and the key progarmming diagnostic device according to the connection diagram. Press the START switch on the Godiag BMW CAS1/CAS2 Mech-Key Test Platform and the POW indicator light will light up, indicating that the test platform has output power. The indicator light on the CAS1 mode will also light up. [Please use 12V 2.5A power supply, otherwise it will not be able to drive the CAS1 module]

2.Select “key learn—CAS/EWS Information---Connect-- Read EEPROM”. [Be careful not to insert the key. If the data cannot be read, please reconnect and turn on the platform power.] [Note: Do not perform a synchronization test between the key and the CAS1 module, otherwise the connection or data reading will not be possible. If a synchronization test is performed, please disconnect the power supply and reconnect the device and CAS module.]

Save to File...

If you want to read the CAS mileage or modify the CAS mileage, please operate the corresponding menu "Read KM". It can also read CAS code-DME.

3.Key progarmming steps: select “key learn—CAS Key Learn----Connect”. Select “Get Key Info” and “Save Key Info”.

4.Select an unused key position, be sure to select the “prepare dealer key with Progarmmer” menu, and use the VVDI2 key Progarmmer to generate the key. [Because the CAS1 module key identification socket or GODIAG BMW CAS1/CAS2 Mech-Key Test Platform key sensor cannot generate dealer keys.]


5. After the dealer key is successfully Progarmmed, place the key into the CAS1 module key module socket for testing. For test steps, please refer to the CAS1 module and key synchronization detection steps.If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV” for synchronization. [When performing synchronization, the key must be placed in the VVDI2 device key sensing area.]

Package Includes:

1pc x GODIAG For BMW CAS1/CAS2 Mech-Key Test Platform

1pc x OBD2 to DB25 Cable

ITEM 3:GODIAG CAS2 CAS3 SER Semi Smart Test Platform Detect CAS & Key Synchronization Solder-free Matching CAS Data Read, Write and Progarm

Please note:that it does not support use with Autel devices

GodiagCAS2 CAS3 SER Semi Smart Test Platform is a dedicated device developed for BMW lo-cks-miths, maintenance engineers and CAS2 / CAS3,CAS3+ CAS3++ progarmming engineers. It can cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad /Xhorse vvdi 2 / bmw vvdi bim tool / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lo-st m-atching or key addition operations. This product is suitable for magnetic semi-intelligent or smart keys.

Note:GodiagCAS2 CAS3 SER Semi Smart Test Platform does not support mechanical key CAS2 and cannot be used with diagnostic equipment or with GT100 GT100+.

Product Features:

5.CASkeydatabackup

Product Functions:

1.Check wheteher CAS2 / CAS3, CAS3+ CAS3++ modules and magnetic semi-intelligent/smart keys are synchronized.

2.Cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lo-st ma-tching or key addition operations.

3.CAS2 / CAS3, CAS3+ CAS3++ module diagnostics

4.CAS2 / CAS3, CAS3+ CAS3++ module progarmming

Module and key synchronization detection:

Check whether the CAS2 / CAS3, CAS3+ CAS3++ module and the magnetic semi-intelligent smart key can be synchronized:

Step 1:Connect the CAS2/CAS3, CAS3+ CAS3++ modules according to the connection diagram.

Step 2:Put the key into the key sensing area.

Step 3:Connect the power supply and the corresponding power indicator light will light up. The start/stop button light is on. The coil sensor light will f-lash. [Indicates that the module can send out the key sensing signal normally. If the key and the module are synchronized, the light will f-lash regularly or stay on. If the key and module are out of sync, the fl-ashing will be irregular and will stop after one minute.]

Step 4:Press the start switch. [If the key is synchronized with the CAS module, the IMMO synchronization detection indicator light will light up and the internal buzzer of the machine will sound. If the key is not synchronized with the CAS module, the IMMO synchronization detection indicator light will not light up and the internal buzzer of the machine will not sound.]

Step 5:Press the analog start and stop button, the IMMO synchronization detection indicator light will go out after 3 seconds. Press the analog start/stop button again and the IMMO synchronization detection indicator light will light up.

The following uses Xhorse vvdi2 device to perform BMW CAS2/CAS3, CAS3+ CAS3++ semi-intelligent/smart key progarmming and mat-ching operations:

1.Connect the CAS2/CAS3, CAS3+ CAS3++ module and the key progarmming diagnostic device according to the connection diagram.

2.Select “key learn—CAS Key Learn---Connect”.

3.After successfully identifying the CAS information, select “Get Key Info” and “Save Key Info”.

4.Select an unused key position, be sure to select the “prepare dealer key with progarmmer” menu, and use the VVDI2 key progarmmer to generate the key. If the key is placed in the GODIAG CAS2 CAS3 SER Semi Smart Test Platform key sensing area, the dealer key will not be generated.


5.After progarmming the dealer key, put the key into the Godiag CAS2 CAS3 SER Semi Smart Test Platform induction port for testing. For test steps, please refer to “Synchronous Detection of Module and Key”.If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV”. [When performing synchronization, the key must be placed in the key sensing area of the VVDI2 device.]

Package Includes:

1pc xGODIAG CAS2 CAS3 SER Semi Smart Test Platform

1pc x OBD2 to DB25 Cable

• About Us
• Payment
• Shipping
• Terms
• Returns
• Contact Us

We are a global obd tools online shop. We've been running for more than ten years exporter featuring professional obd tools for Do-It-Yourself and professional automotive mechanics with wholesale price.

Our Ever-Lasting Promise Is"Top Quality, Good Service, Competitive Price".We Sell You Tools And Provide You Technical Support For Free Of Charge, And Then You Can Do Repairing Work By Yourself, No Need To Pay Professional Repairmen For Expensive Repairing Cost.Are You An Online Shop Owner? And You Are Hunting For A Super Quality Auto Diagnostics Wholesaler? Then You Come To The Right Shop. Besides We Can Be Your Source For ECU Chip Tunning, Auto Diagnostic Software, And More Tools.

We Are Trying To Level Up Our Tools And Improve Our Customer Service To Satisfy Customers First Needs In The Terms Of Good Quality, Competitive Prices, Fast Delivery And Prompt Response To Our Customer Questions.

1.We accept all common forms of payment such asCredit cards、Debit card、Google Pay ect.Please contact us if you need to use another method to pay.

2. Please make the payment within 3 days of sale closing, otherwise a UPI (Unpaid Item) will be put on your account.

3.Total Amount Fees includes the final sale price plus S&H(Shipping and Handling).

We are not responsible for buyers’ local taxes.

Please include your special requests in note if there is any.

1.Orders will be shipped out within 1-3 business days after the payment is received(except weekends and holidays).
2. Item will be shipped by USPS,UPS or Fedex,it tooks about 3-5 days,exact delivery time varies by shipping methods and your location.
If you do not receive your order in the estimated time,please contact us freely, We'll try our best to solve the delivery problem.
3.The item will be shipped to your Confirmed Shipping Address in the order you Place. If you would like to post to other address ,
please timely leave us a note when making payment. We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
4. Please note we are not responsible for buyers' Local Customs Taxes.

Taxes, Duties, Tariffs
We can not be held responsible for any additional charges such as taxes, duties, tariffs, or brokerage fees that may apply to international orders. Normally we would mark the parcel in low value to avoid the duty, but different country, the policy is different, hence to find out which if any of these may apply, please contact your local government.

Warranty

Before shipping out, all goods have been double verified. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard. After finish quality check,our QC stuff will carefully do quality check and paste our own QC labelin the form of month/date/year on every product.
If you have any using problem of the products which buy from us, Please contact us on message firstly instead of giving us Negative or Neutral response, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

We accept you to return the item Within 30 Days for a replacement Or Money Back When item has the problem bellow:

First, If you are not satisfied with the item you received, plsReturn it within 30 daysfor a replacement or money back. please contact us via message at the first time to get Return Address instead of sending back directly without permission.

Second, If the item you received has quality problem, You can get full refund or exchange a new good item.You can start a return for the reason"it doesn't fit or i order it by mistake or Don’t like it or or Found a better price".We will provide you with a label,thank you

Third, All returned items must be in theOriginal Packagingand please Provide the shipping tracking number, specific reason for the return.

1. If you haveany questions,pleasecontact us by message. we will try our best to provide the best service and reliable products for every customer.we would be very glad to help you. we would try our best to reply to your emails as soon as possible.
2. Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. we will responde you within 24 hours. please contact us to resolve the issue before leaving negative response or low detail seller ratings.thanks!
3.Working time:GMT8 (8:30-18:00) from Monday to Friday.Out of duty on Saturday and Sunday!

About Us We are a global obd tools online shop. We've been running for more than ten years exporter featuring professional obd tools for Do-It-Yourself and professional automotive mechanics with wholesale price.

Our Ever-Lasting Promise Is"Top Quality, Good Service, Competitive Price".We Sell You Tools And Provide You Technical Support For Free Of Charge, And Then You Can Do Repairing Work By Yourself, No Need To Pay Professional Repairmen For Expensive Repairing Cost.Are You An Online Shop Owner? And You Are Hunting For A Super Quality Auto Diagnostics Wholesaler? Then You Come To The Right Shop. Besides We Can Be Your Source For ECU Chip Tunning, Auto Diagnostic Software, And More Tools.

We Are Trying To Level Up Our Tools And Improve Our Customer Service To Satisfy Customers First Needs In The Terms Of Good Quality, Competitive Prices, Fast Delivery And Prompt Response To Our Customer Questions.

Payment

1.We accept all common forms of payment such asCredit cards、Debit card、Google Pay ect.Please contact us if you need to use another method to pay.

2. Please make the payment within 3 days of sale closing, otherwise a UPI (Unpaid Item) will be put on your account.

3.Total Amount Fees includes the final sale price plus S&H(Shipping and Handling).

We are not responsible for buyers’ local taxes.

Please include your special requests in note if there is any.

Shipping

1.Orders will be shipped out within 1-3 business days after the payment is received(except weekends and holidays).
2. Item will be shipped by USPS,UPS or Fedex,it tooks about 3-5 days,exact delivery time varies by shipping methods and your location.
If you do not receive your order in the estimated time,please contact us freely, We'll try our best to solve the delivery problem.
3.The item will be shipped to your Confirmed Shipping Address in the order you Place. If you would like to post to other address ,
please timely leave us a note when making payment. We will NOT be responsible for any delivery failure due to unclear, unconfirmed or incomplete addresses given.
4. Please note we are not responsible for buyers' Local Customs Taxes.

Terms

Taxes, Duties, Tariffs
We can not be held responsible for any additional charges such as taxes, duties, tariffs, or brokerage fees that may apply to international orders. Normally we would mark the parcel in low value to avoid the duty, but different country, the policy is different, hence to find out which if any of these may apply, please contact your local government.

Warranty

Before shipping out, all goods have been double verified. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard. After finish quality check,our QC stuff will carefully do quality check and paste our own QC labelin the form of month/date/year on every product.
If you have any using problem of the products which buy from us, Please contact us on message firstly instead of giving us Negative or Neutral response, and we will discuss the issue with you. Via our technical support, we can dig out your using problem via our technical support in most of cases.

Returns

We accept you to return the item Within 30 Days for a replacement Or Money Back When item has the problem bellow:

First, If you are not satisfied with the item you received, plsReturn it within 30 daysfor a replacement or money back. please contact us via message at the first time to get Return Address instead of sending back directly without permission.

Second, If the item you received has quality problem, You can get full refund or exchange a new good item.You can start a return for the reason"it doesn't fit or i order it by mistake or Don’t like it or or Found a better price".We will provide you with a label,thank you

Third, All returned items must be in theOriginal Packagingand please Provide the shipping tracking number, specific reason for the return.

Contact Us 1. If you haveany questions,pleasecontact us by message. we will try our best to provide the best service and reliable products for every customer.we would be very glad to help you. we would try our best to reply to your emails as soon as possible.
2. Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. we will responde you within 24 hours. please contact us to resolve the issue before leaving negative response or low detail seller ratings.thanks!
3.Working time:GMT8 (8:30-18:00) from Monday to Friday.Out of duty on Saturday and Sunday!

PaymentShippingReturn policyAbout usContact us

Copyright © - Tongtool All rights reserved | Design:Tongtool

100% Genuine High Quality Fast Shipping