![Hobart 9\](img-large/g/84wAAeSw-GBpCj9f/s-l1600/Hobart-9-Pelican-Slicing-Wheel-for-12-Hub-SEIZED-P.jpg "Hobart 9\")
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hobart 9\" Pelican Slicing Wheel for #12 Hub - SEIZED - PARTS ONLY - READ:
$10.00
Hobart 9\" Pelican Slicing Wheel for #12 Hub - SEIZED - PARTS ONLY - READ
Parts Only - Not Working - The slicing blade and drive shaft are seized / stuck in the slicer plate and will not move in or out. The blade and drive shaft is approximately 1/2\" stuck out of the front of the slicer plate. There are metal filings near the threaded edge of the slicer plate indicating metal on metal contact or running without lubrication. The parts needs to be heated and lubricated to separate the two parts and then the threaded edge needs to be polished / honed. Alternatively, the blade could just be removed and saved and other parts scrapped. The part is surprising clean even though it is stuck. I make no representations as to whether to part can be restored and fixed. The thrust bearing, spring and adjuster nut parts are not included with this listing.
I can\'t fix it. Maybe you can. Ask questions prior to purchase. There are no returns.
