When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- About
- Store
- Contact
- Shipping
- response
ModeloDrive FRP OER Racing Doors MRS for MR2 Spyder Toyota 00-05 modelodrive_120308 OFF-ROAD CAGED RACING CAR TRACK USE ONLY. NOT FOR STREET USE! Description / Notes:
Part #: modelodrive_120308
Make: Toyota
Model: MR2 Spyder
Material: FRP
Condition: New
Product Notes :
ModeloDrive FRP OER Racing Doors MRS for MR2 Spyder Toyota 00-05 modelodrive_120308
Description :
This is a OER Racing Doors manufactured or distributed by ModeloDrive with FRP being the primary exterior surface material. ModeloDrive FRP (fiberglass) parts are made to a higher standard than most mass produced US market fiberglass parts. Holes will not always be pre-drilled so you still will need to dry fit the parts before they can be prepped and finished. Due to the nature of fiberglass there may be cracks or surface imperfections that need filled and/or leveled. This should be fixed in the prep stage of installation at a professional body shop. Bolts, screws, and double sided tape is not included. All ModeloDrive fiberglass parts require modification, shaving, sanding, drilling, filling in order to ensure proper fitment but generally speaking less than the competition.
New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Fiberglass parts always require prep work before they can be primed and painted. This product is made with fiberglass material, therefore it will exhibit chips, breaks, cracks, waves, scratches and holes which require modification. It is necessary to dry fit and drill mounting holes and preform body work before paint. Cutting and adding of fiberglass may be required for proper fitment. Ships direct from the manufacturer or a distributor. Primer finish. Hand layup is the manufacturing process used for the majority of our fiberglass parts. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer
ModeloDrive door caps typically overlap the existing door to extend the styling of a matching body kit. They are usually installed using bolts, 3M automotive trim tape, or specialized epoxy bonding adhesive. Modifications may be required to the vehicle’s original doors, and trimming or reshaping of the fiberglass may be necessary to achieve a secure fit. Door caps are purely cosmetic and do not enhance structural integrity or safety. It\'s essential to ensure compatibility with the vehicle’s design and the body kit before installation.
Replacement Doors
ModeloDrive replacement doors, made of fiberglass, are intended for track use only and offer no protective features for street driving. These lightweight doors are specifically designed for racing or off-road use on fully caged vehicles equipped with door bars for added safety. They do not provide the structural strength required for street use and are not street-legal. Installation of ModeloDrive replacement doors may require cutting, trimming, and reshaping the fiberglass, along with sourcing separate mounting hardware such as bolts and fasteners. Modifications to the vehicle’s door frame are often necessary for proper fitment.
For the best results, ModeloDrive strongly recommends professional installation by a custom shop experienced in handling fiberglass components. Traditional auto repair shops may not possess the expertise needed to properly trim, cut, or modify fiberglass for these applications. As with all ModeloDrive body kits and accessories, these doors and door caps are strictly for off-road, show, or track use only. Due to Department of Transportation (DOT) regulations, most ModeloDrive doors and door caps are not street-legal. ModeloDrive does not endorse or recommend using these products on public roads or highways.
Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description.
Will it fit my vehicle?
- Pay close attention to the make, model and year, but also the trim level.
- The parts finder may be inaccurate, go by our listing title and description.
- Verify with us if you are unsure
US Customers
- PayPal is accepted
- Visa Master Discover also accepted
International Customers
- Please contact us before purchasing
- Payment types vary
Our goal is to earn 5 star rating with every purchase!
Tell us how we can make your exerience a 5-star one!
All Copyright © Tilbury Enterprises LLC
