New Overdrive Solenoid Toyota Pickup , VAN ,Truck over drive,Auto Transmission For Sale

This is aAW71,A43Dbrand new replacement over drive valve with updated Over Size Ports(larger diameter than factory for better ATF flow) and includes 2 new "O" ring seals for 1981 -1994 year model Toyota truck & pickup and early Toyota motorhome ,1982-1992 Toyota Van , JDM 2 wheel drive Hilux with Automatic Transmission With Overdrive . It will fit early model Toyota mini VAN ,and JDM HIACE Van from 1982 to 1993 year model used in Asian,EU and Australasia (Contact us before purchasing).
See installation instruction below ,print and follow.This is replacement and compatible with following Toyota OEM part numbers:
85420-22060 Solenoid Assy, Transmission, Toyota 85420-38010 (1993,1994 Pickup) must use your old day shipping process within lower 48 states ( No shipping to Porto Rico zip code, no exception),

- Delivery with Registered mail in USA and signature required > make sure you or someone is at the address to receive it. The USPS will not drop the item by your door without having your signature.

- We offer international shipping to Canada ( No Shipping to South America or Caribbean, sign up for global or international shipping on to get the right shipping quotes ).

• - For International shipping to EU,AUSSI,NZ,JAPAN,ASIA addresses, we only provide tracking up to last port of departure in USA. No tracking will be provided beyond that point and or in your country. By purchasing this item ,you agreed and you are accepting this term that YOU WILL NOT CANCEL PAYMENT under Item NOT Received or item Not Delivered.

Technical information:

• Solenoid, Overdrive OS for Toyota fits : A42D, A43D transmission (Mounts on the left side of transmission case (Driver side left) outside above the transmission pan on Year model 1982 and Up to early 1994
• .For other year and model contact us
  
• OEM TOYOTA Factory part number : 85420-22060
  
• Other part number 8542022060
• Direct fit for 85420-28020

We also carry this part for model listed below in our other listing

• Solenoid S4 (4th) A40 / A40D / A41 / A42D / A42DL / A43D / A43DE / A43DL / A44DE / A44DL / A45DL / A46DE / A46DF / A47DE (72-up)

  Toyota Carina, Celica, Corolla, Cressida, Crown, (2.2L, 2.4L), Supra

  Isuzu I-Mark (1.8L), Pick-up (2.0L, 2.3L)

• Build with heavy duty harness cable

• Requires using your old plug connector to be attach to new overdrive solenoid with butt connector (provided in this kit).
  
• Comes with 2 set of new "O" Rings
  
• Easy installation and email support ( Clean /brush/wash the solenoid area before pulling your old one out).
• Generally replacement can be done by yourself. No mechanic or shop support needed if installation guide is followed.

To Request Return,YOU MUST FOLLOW THE TERMS listed here:1-“Item must be returned in original non-open condition unused , within 7 days from date of purchase. 2- return item as new as you received in the original packing / box with seals .3 -Not used or installed. 4-Installation of this part on the vehicle will void return.No exception.5-By holding this item in your position for more than 7 days after purchase /delivery date, you agreed with sale's term, absolutely we will not honer return and will decline return and charge-back with your financial institution. Please do not send your old one back to get refund. we will send your name ,address and phone number to your local LE office at your town and purchases to be blocked. Follow these instructions to avoid damaging or leaks after installing new valve:ATF transmission oil Must be change when this valve is replaced. failure to change ATF oil will allow particles and contamination from transmission to block ports and cause leak from upper boot part of the seal where cable is attached which it will voids return and warranty. Avoid costly replacement.To install follow instruction below:
1- clean the area where old valve is mounted before removing the old overdrive valve. clean the back where (2) mounting bolts are
2-wash the back and front of the valve area with carburetor cleaner/brake cleaner etc. blow air if possible to clean the dirt
3-Remove the old valve facing up.
4-Do not clean the area after the old valve is removed. Dirt will fall in to transmission port causing damages to transmission.5-install new valve with O-rings already installed on the valve. DO not place the o-rings on the transmission side first6-Mount two bolts and torque them to 10 ft lb.
7-Connect cable to your old cable connector with butt connector provided and crimp it.Roll black tape over the connector to prevent water or moisture onto wiring harness .
8-Start the engine in park and check for ATF leaks around the valve lower seals and upper cable cover seal for up to 3 minutes9- Drain old ATF fluid from transmission oil pan and fill the transmission with new approved ATF fluid