When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Item Specifics:
New Parker 404XR / MX80L X/Y Stage Assembly:
X = Parker404100XR(100mm travel)
Y = ParkerMX80LT04-..E9(150mm travel)
Renishaw 0.01um Encoder (MX80L)
New Parker SM233AL-N10N Servo (404XR)
x2 New Parker Vix500AH Servo Drives
New Mean Well NDR-120-24 Power Supply
New Mean Well SDR-480P-48 Power Supply
Includes Inspection Reports 404XR & MX80L
Also Includes Proximity Sensor Cable for 404XR
This system has been hooked together and tested using
Mach3 software and everything works perfectly (see video).
(Pictures & video are of the actual item that you will receive.)
**Please note that the sale does not include AC power cords and the buyer will need to provide AC power to both power supplies.**
Item Description:
This is a New 404XR/MX80L XY stage in perfect working condition.
I have also included all new drivers and power supplies necessary to
operate the stage. The drivers have been configured and everything
has been wired together and tested using Mach3 software (see video).
The X stage is a model 404100XRMS with a 100mm rated stroke
length,but themax stroke length is actually about 120mm (4-3/4").
The ballscrew is precision ground 16mm dia. x 5mm pitch and
the rails are modelHiwin MGNR9Hwith two bearings on each rail.
The 404XR actuator has (3) proximity sensors (Limit / Homing)
that are mounted to the side of the actuators in a protective
aluminum housing with clear plastic top cover & 5-pin connector.
The 404XR comes with a Parker SM233AL-N10N nema23 servo
which has a 20,000ppr encoder (post quad). Please note that the
SM233AL servo has a custom part number (CM233AL-118866)
because it has custom strain relief connectors where the cables
exit the motor but otherwise it is the same as a SM233AL-N10N.
The Y stage is a model MX80LT04-MPD13..E9 linear servo actuator
that has the highest resolution encoder available, with a resolution
of 0.01um or 10 nanometer (0.01 microns = 0.00001mm).
The MX80L also comes with Limit & Homing sensors built-in.
The Vix500AH servo drive is brand new and is used to control
the MX80L using step/direction signals sent from a Mach3
breakout board or indexer. The MX80L has a 0.01um encoder
that requires 100,000 steps per millimeter. The max speed of
MX80L is about 30mm/second. Please note that you can also
use the MX80L without the Renishaw Interpolater to get a 5um
resolution and this will dramatically increase the speed.
The Vix500AH servo drive for the 404XR is also brand new and
uses step/direction signals to control the attached servo motor.
The SM233AL servo requires 20,000 steps per rotation which
equals 4,000 steps per millimeter or 0.25um (0.00025mm).
The max speed of the 404XR is about 70mm/second (no load).
**Please note that the speed of the SM233AL servo is limited
because of the 48v power supply and you can probably get
some additional speed from the motor if you use a higher
voltage power supply (Vix500AH maximum voltage is 80v)**
Also included with this sale are the Mean Well power supplies.
The NDR-120-24 is a 24v supply that provides power to both Vix500AH
logic circuits and the SDR-480P-48 is a 48v supply that powers both
the nema23 servo motor and the MX80L linear servo motor.
The 404XR also comes with a proximity sensor cable.
The Vix500AH servo drives will work with step/directionsoftware
like Mach3 or similar. In the videos I am using a SmoothStepper
breakout board (not included with this sale) and that is the
breakout board I would recommend if you are goingto use Mach3
software because you will need a high 'pulse output' to operate
the MX80L at the speeds shown in the videos I have included.
404XR Manufacturer Notes:
The 400XR standard series linear positioners offer reliable performance and unmatched versatility. Convenient mounting features enable XY table combinations to be quickly and easily constructed. The XR family offers an unrivaled array of features and options which are easily matched to fit any application, from the very basic to the highly complex.
Premier performance, modular compatibility, and quick delivery have made these tables the perfect building blocks for cost-effective multi-axis systems.
- 24/7 operation at 100% duty
- Dowel holes for repeatable mounting
- IP30 rated protective strip seals
- Travels up to 2 meters
- Optional single point lube for easy maintenance
- Full range of sizes from 90mm to 285mm wide
MX80L Manufacturer Notes:
Parker's MX80L Miniature Stage, the smallest linear servo-motor driven positioner in the
industry, isredefining high throughput automation in the world of miniature positioners.
The MX80 is a high performancelinear servo motorstage designed to meet today's 24/7
production demands requiring rapid-firepositioning of light loads within a small work envelope.
- Miniature Size - Low Profile (25 mm high X 80 mm wide)
- Linear Servo-motor drive
- 5G acceleration
- High velocity (2 m/sec.)
- Quick Settling
- Submicron precision
- Multi-axis platform
- Selectable travels:25,50,100,150 mm.
- Cross Roller Bearing (zero cage creep design)
- "Plug-in" intelligent drive
- No Moving Cables
- Dowel holes for repeatable mounting of payload
- Cleanroom and Low ESD options
Vix500AH Manufacturer Notes:
The ViX series servo drive is produced in two versions having continuous current ratings of 2.5 A and 5 A at motor bus voltages up to 80VDC. A peak current capability of three times the continuous rating provides an outstanding acceleration performance. The device offers the choice of either resolver or encoder response (user selectable). To assist with initial commissioning, the drive can correct most motor and response wiring errors automatically.
ViX500 Servo Drive/Controller Features:
• Power Output Rating : 500 VA
• Drive Input Supply : 48...80VDC
• Output Current : continuous 5.0 Arms / peak 15 Arms for 2 seconds
• Analog Control or Built-in Controller (using Parker's proven EASI code)
• Powerful EASI-V Front-End Software
• Programmable Resolution
• Encoder and Resolver response Supported
• High-Resolution Sine-Cosine response Option (for use with Parker MX Linear Motor Positioners)
• Optional CANopen/RS485 Interface
• Field-oriented control for improved dynamic performance
• Panel or DIN rail mounting
• Compatible with Parker servo motors
A powerful front-end software package is supplied with the drive and permits straightforward, rapid configuration and tuning. When used with Parker servo motors, only the motor type number is required for full configuration. ViX intelligent drives incorporate a powerful controller using Parker's wellproven EASI command language. As well as carrying out all basic motion control functions, the controller performs more advanced operations such as external encoder following and registration moves. All necessary configuration is performed by software. In addition to an RS232C interface which is included in the standard drive, an optional factory-installed fieldbus module allows for both CANopen and RS485 communication. The base version of the drive can be controlled by step-direction signals in addition to an analog velocity or torque demand. ViX forms part of a new, fully-integrated system of motion control components which includes digital servo and stepper drives, power supplies, operator panels and extension I/Os. These components complement Parker's range of mechanical positioning systems which includes precision tables, electric cylinders and linear actuators.
Manufacturer Website class="MsoNormal" align="center" style="font-family: Arial; font-size: 18.6667px; text-align: left; color: rgb(0, 0, 0); font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial; margin: 0in 0in 0pt; background-image: initial; background-attachment: initial; background-color: white; background-origin: initial; background-clip: initial;">
Shipping Details:Shipping rate applies to lower 48 States only.International orders will be shipped via 's 'Global Shipping Program', please click on the 'Shipping and Payments' tab above and select your country from the drop-down menu to get a shipping quote from . If your country is not listed then please contact me for a shipping quote before placing a offer.
