TRAXXAS SLEDGE Compatible FRONT BUMPER BODY PROTECTOR | PREVENT TUCKED TORN BODY For Sale

This is aTRAXXAS SLEDGE compatiblekit that extends the front bumper up an additional 30mm and follows the inner contours of the body to help prevent body damage and tucking.

• Adds additional front support behind the body during a nose dive or impact.
• Made of nearly indestructiblehigh temperatureNylon.
• No permanent modification to car required.
• Does not interfere with body removal.
• Easy to install.
• sale includes the bumper mount and bumper as well as all required hardware.

Check out the ReactionRC store for other upgrades and discounts.Installation:*Refer to sale images for mounting locations.*Remove screws circled in red from the front shock tower. Attach the bumper mount by first threading the 10mm m2.5 screws through the lower mount holes and into the front bulkhead at the locations circled in yellow. Then thread the 18mm m3 screws into the top location replacing the previously removed screws going through the shock tower. I recommendnot tightening everything down until all 4 screws are in place. Once bumper mount is secure attach the bumper, with curved are on top, using the 2 remaining 18mm m3 screws. Some pressure may be required to get the screws started. Feel free to message me if you have any questions. Thanks.This is a custom ReactionRC part and not associated with TRAXXAS.