When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product Description
Note:
This version is Modified MPPT version which will havemore efficient than PWM but cheaper than TRUE MPPT Version.
So You should confirm this condition before Order.
MPPT Orange
Safety Instructions:
- Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
- Controller Provided MPPT Maximum power point tracking Function, charging mode is PWM
- Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
- The battery cable should be as short as possible to minimize loss.
- The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL
- It is not suited for nickel metal hydride, lithium ions or other batteries.
- The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery. Connect the photovoltaic module to the regulator - plus and minus. Connect the consumer to the charge regulator - plus and minus.
Feature:
- Automatic Identification System Voltage,12V/24V auto recognition.
- Completed technical data for setup and modify.
- The load control mode can be selected, the timer function canbe reset for street light at night.
- Discharge capacity control& Discharge Counter of Ampere Hour.
- Working Storage Function: record the total run time of system,Record timers of error during running time, record times of full charged battery.
- Solar Panels, Battery, Solar Charge Controller positive poles areall connected together, adopting negative MOSFET in series control circuit.
- LCD display &Double Button Operation :high-definition display device status.
- Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity.
- Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection,temperature protection, overload protection, low voltage protection.
- Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up.
- Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships.
Specifications:
Model
30A/50A/70A
System Voltage
12V/24V
Max. Input Voltage of solar panel
55V
Self-consumption
10mA
Max.charge current
30A 50A 70A
Max. discharge current
30A 50A 70A
LVD
11.0V,ADJ 9V-12V;x 2/24V
LVR
12.6V ,ADJ 11V-13.5V;x2/24V
Float Voltage
13.8V ,ADJ 13V-15V;x2/ 24V
Boost charging
14.4V ;x2/24V Battery Voltage less than 12Vstart boost charging 2 hours
Battery Over Voltage Protection
16.5V;x2/24V
Reverse Connection Protection
yes
Load Over Current Protection
Yes, each two minutes restart once
Temperature Compensation
-24 mV /°C for 12V system;x 2/24V
Working Temperature
-20℃+55℃
Waterproof grade
IP32
Size 30A
175.9mmx139mmx40.1mm
Size 50A
209 .3mmx191.7mmx52.9mm
Size 70A
229.4mmx201mm×54.7mm
USB
5V 2.1A
DC output
12V/24V
You\'llReceive:
1xSolar Panels Battery Charge Controller
MPPT/PWM Orange
Feature:
Advancedmaximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance,and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge currentdisplay, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions.
- Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable,easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
- Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller.
- Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
Specifications:
Name
LCD Screen Solar Controller
Model
10A/20A/30A
Voltage
DC 12V / 24V
Display
LCD screen
Self-consumption
<10MA
Overcharge protection
14.4V / 28.8V
Overcharge Float charge
13.7V / 27.4V
Charge recovery voltage
12.6V / 25.2V
Over discharge protection
10.7V / 21.4V
Over discharge recovery
12.6V / 25.2V
Dual USB output
5V / 2A (charge mobile phone, iPad, etc.)
Working temperature
-35℃-60℃
12V fits 18V solar panel, 24V fits 36V solar panel
12.0 volt lead acid battery corresponding
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery corresponding
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery corresponding
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
You\'llReceive:
1xSolar Panels Battery Charge Controller
MPPT Blue
SafetyInstructions:
- Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
- The battery cable shouldbe as short as possible to minimize loss.
- The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL
- Itis not suited for nickel metal hydride, lithium ions or other batteries.
- The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
SystemConnection:
Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery. Connect the photovoltaic module to the regulator - plus and minus. Connect the consumer to thecharge regulator - plus and minus.
100% brand new and high quality. Build-in industrial micro controller. One-key setting,digital display,auto memory function. MPPT solar charge controller MPPT: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30% This controller can charge and discharge at the same time. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.
Function:
Rated Voltage
12V/24V
Rated Current
10A/20A/30A/40A/50A/60A
Max PV Voltage
23V(12V Battery)
46V(24V Battery)
Max PV Input Power
30A: 360W (12V) 720W (24V)
40A: 480W (12V) 960W (24V)
50A: 600W (12V) 1200W(24V)
60A: 720W(12V) 1440W(24V)
100A: 1200W(12V) 2400W(24V)
Size
17*9.2*4.5cm
Operating temperature
-10+60℃
Material
ROHS+ABS
Application
Home, Industrial, Commercial
You\'llReceive:
1Pcs Solar Charger Controller( C urrent as you choose ) 1Pcs User Manuel