When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Vintage 1984 Trek 620 Touring Bike Frame 19in 48cm Gray Reynolds 531 700c 126
Vintage Trek 620 steel touring bike frameset in gray.
HTF in a smaller size. Trek serial indicates this is likely a 19" 1984 620 frame.
Approx 48cm seat tube center to top, 53-54cm top tube center to center
Fits 27/700c x 126mm wheel, Cantilever brake. Trek would have delivered this with 27in wheels. Likely fits 700c with some brake setups.
Frame uses Trek's 600 Series lugged construction with Reynolds 531CS butted frame tubes, fork, and stays, as shown on the seat tube decal.
Head tube carries a gold and black Trek head badge, and the down tube features large TREK 620 logos with matching 600 Series script on the top tube.
Frameset is built for cantilever brakes with brazed-on studs front and rear, horizontal rear dropouts with adjustment screws, and rack and fender eyelets at the dropouts for loaded touring setups.
Braze-ons include a downtube shifter clamp, top-tube cable guides for the rear brake, dual water bottle mounts on the down tube and seat tube, a rear cantilever cable hanger at the seat cluster, and cable stops and guides along the stays.
Frameset includes a 1 in threaded steel fork with matching gray finish, cantilever studs, rack and fender eyelets, and partial threaded headset components installed.
Weight: 6 lb 14 oz.
Bicycle frames are professionally packed and ship wrapped with foam inside a new box. Any headset and bottom bracket parts pictured are included, have not been inspected, may need service. No dents or cracks. Some scratches and marks. All parts pictured are included.
Used vintage Trek 620 frameset with cosmetic wear from prior use. Original gray paint shows chips, scratches, and scuffs throughout with areas of surface rust on exposed steel, especially along the chainstays, seatstays, fork blades, cable stops, and dropouts. Decals have fading, flaking, and small missing sections. Brake posts and small fittings show finish wear and oxidation. No cracks, dents, or repairs visible on the frame or fork. Headset and Shimano square-taper bottom bracket remain installed and should be assumed to need overhaul or replacement. Includes frame, fork, headset pieces, bottom bracket, downtube shifter clamp, cable guide, and dropout adjuster screws only; no other components are included.
