When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
IF YOU KEEP BURNING UP 5HP 184T FRAME 208-230V MOTORS DUE ON YOUR 208V INCOMING POWER SUPPLY, THIS MOTOR IS YOUR SOLUTION. STANDARD 5HP SINGLE PHASE 208-230V ELECTRIC MOTORS HAVE A 1.15 SERVICE FACTOR AT 230V AND A 1.0 SERVICE FACTOR AT 208V INCOMING VOLTAGE. WHEN YOU CONNECT A 208-230V MOTOR TO A 208V OR UNDER POWER SUPPLY, YOUR'RE RUNNING THAT MOTOR AT THE VERY HOTTEST AND HARDEST ITS CAPABLE OF RUNNING WITH A 1.0 SERVICE FACTOR. SOMETIMES BEYOND ITS SERVICE FACTOR CAPABILITY. IF YOUR INCOMING VOLTAGE DIPS BELOW 208V, CAN AND WILL CAUSE DAMAGE TO THE MOTOR. THIS MOTOR IS RATED 200V WITH A 1.15 SERVICE FACTOR AT 200V. SO WITH THE NEMA (NATIONAL ELECTRIC MOTOR ASSOCIATION) RULES OF 10% DEVIATION OF VOLTAGE FOR ELECTRIC MOTORS IN THE UNITED STATES, YOU CAN USE THIS 200V MOTOR AS LOW AS 190VOLT AND NO HIGHER THAN 220V INCOMING VOLTAGE. IF YOU HAVE A 5HP SINGLE PHASE 184T 208-230V MOTOR AND YOUR INCOMING VOLTAGE IS 208V AND SOMETIMES LOWER. THIS MOTOR IS YOUR BEST SOLUTION. ITS SPECIFICALLY DESIGNED TO RUN AT THAT LOWER VOLTAGE WELL WITHIN ITS 1.15 SERVICE FACTOR. THIS 200V MOTOR WILL LAST MUCH LONGER.
THIS 5HP MOTOR COMES ON A 184T FRAME AND ROTATES AT 1750 RPM. THIS MOTOR IS REVERSIBLE AND CAN BE WIRED TO ROTATE EITHER CW OR CCW.THIS IS AN OPEN DRIP PROOF MOTOR AND IS INTENDED TO BE USED IN DRY, NON-DUSTY INDOOR ENVIRONMENTS. THIS MOTOR IS BACKED BY A FULL 18 MONTH MANUFACTURERS WARRANTY FROM DATE OF SALE. WEG STEEL FRAME COMPRESSOR DUTY ELECTRIC MOTORS SET THE STANDARD FOR HIGH TORQUE, HIGH PERFORMANCE AND ARE WELL SUITED FOR APPLICATIONS THAT REQUIRE A HEAVY STARTING LOAD. CAPACITOR START TYPE MOTORS LIKE THIS ALLOW FOR HIGH STARTING TORQUE.THIS MOTOR ISNOTMADE IN CHINA.
PLEASE MAKE SURE THE ELECTRIC MOTOR YOU ARE REPLACING MATCHES THE HP SPECS, THE FRAME SIZE AND RPM OF THIS MOTOR.
WHY YOU ALWAYS NEED A MAGNETIC STARTER ON INDUSTRIAL GRADE MOTORS. A MAGNETIC STARTER IS ALWAYS REQUIRED ON ANY 5HP 184T FRAME MOTOR AND LARGER. WIRING AN INDUSTRIAL SIZE MOTOR THROUGH THE PRESSURE SWITCH ALONE, IS NEVER A GOOD IDEA, AND HERE'S WHY. PRESSURE SWITCHES DO NOT COME WITH OVERLOAD PROTECTION FROM POWER SURGE OR LIGHTING. IN ADDITION, PRESSURE SWITCHES HAVE VERY SMALL CONTACT POINTS THAT CONNECT TO THE MOTOR. SMALL CONTACT POINTS CAN STARVE YOUR MOTOR OF THE NECESSARY POWER IT REQUIRES TO START AND RUN NORMALLY. MAGNETIC STARTERS NOT ONLY PROVIDE YOU WITH MOTOR PROTECTION FROM POWER SURGE AND LIGHTING, THEY ALSO HAVE LARGER CONTACT POINTS THAT CONNECT TO YOUR ELECTRIC MOTOR. ALLOWING FOR A STEADY FLOW OF CURRENT THAT AN INDUSTRIAL GRADE MOTOR REQUIRES TO RUN AND ESPECIALLY START UP. BY INCORPORATING A MAGNETIC STARTER WILL ALLOW YOUR MOTOR TO LAST MUCH MUCH LONGER.
PLEASE VISIT OUR store FOR THE BEST PRICE AND SELECTION OF MAGNETIC STARTERS.
5HP - 184T FRAME - 1750 RPM - SINGLE PHASE - 200 / 208 VOLT - 1-1/8" SHAFT DIAMETER - 2.75" SHAFT LENGTH
MADE IN BRAZIL
TECHNICAL INFO:
HORSEPOWER: 5
AMPERAGE: 23.8 FULL LOAD AMPS AT 200V
PHASE: SINGLE PHASE
VOLTAGE: 200 / 208
RPM: 1750
BASE: REINFORCED STEEL FIXED BASE
FRAME: 184T
SHAFT DIAMETER: 1-1/8" KEYED SHAFT
SHAFT LENGTH: 2.75"
ROTATION: REVERSIBLE CW OR CCW ROTATION
FREQUENCY: 60HZ
SERVICE FACTOR: 1.15 @ 200V
ENCLOSURE: ODP OPEN DRIP PROOF
CONSTRUCTION: STEEL FRAME CONSTRUCTION
WEIGHT: 102 LBS
WARRANTY: 18 MONTH
ADDITIONAL PRODUCT INFORMATION: MADE IN BRAZIL - CAPACITOR START ALLOWS FOR HIGH STARTING TORQUE
Terms and Conditions
Payment Information:VISA / MASTERCARD / AMEX / DISCOVER / PAYPAL accepted.
Contact Us:Please feel free to contact us anytime through the message board. On each of our items you will see options to contact us. The "ask seller a question" link and the "Contact seller" link are the two best ways to contact us. Your question will automatically link to your purchase or the item in question and will be answered Mon-Fri during our operating hours.No question or message goes unanswered.Please DO NOT contact us via email regarding your purchase.
Return Policy:Here is how to arrange an Arrangements must be made within 30 days of purchase.Returns are permitted only with the prior approval of UPE_Group.A minimum restocking fee of 15% will be applied on returns due to customer error.Authorized returns will be credited at the transaction price, minus any applicable fees. The adjusted amount will refunded back to the buyer's payment method after the item has been returned back to UPE_Group.The above fees will NOT be charged on items returned due to manufacturers’ defect or shipping errors caused by UPE_Group, USPS or FEDEX.
Shipping Address:We ship to the buyers ship to address. Please make sure your ship to address is correct before checking out.
Domestic Shipping:We are open Monday through Friday shipping orders.All orders ship within 24 BUSINESS Hours of payment confirmation. We ship most orders the same day that we receive them, just as long as your payment clears before mid afternoon EST. Items are shipped USPS or FEDEX ground. The shipping method will be listed on the shipping/payments tab or underneath the buy-it-now button on all items. We generate shipping labels through , so your tracking info will be emailed to you the moment your shipping label is generated. You can click the link on your tracking info to get up to date tracking info regarding your shipment. You can find the link on your transaction details page, or under the "Buying" portion on your "My " page. For specific shipping info and combined shipping rules, please click the "shipping and payment" tab on any of our items. That link will show you the shipping specifics and combined shipping rules relating to that specific item.
International Shipping:All items we sell are available for international shipping through the 3rd party Global Shipping program. UPE_Group will ship your item to the global shipping center in Kentucky. From there, forwards the package to your international destination.Please click the shipping/payments tab of our listings for international shipping information or visit this align="left" style="color: rgb(0, 0, 0); font-family: Arial; font-size: x-small; background-color: rgb(255, 255, 255);">Combined Shipping Rules:Simply use the shopping cart feature and add items to your cart for one flat shipping rate. 's Combined shipping Rules are usually implementedby all sellers. The only way for to recognize multiple items going to the same address is by using the shopping cart feature. Add items into ONE shopping cart and check out on ONE transaction/purchase. You can also request an invoice from the seller once you have added all of the items into your shopping cart.
Tracking Information:We provide Tracking info on every item that is purchased on . The tracking info will be emailed to you the day your order is shipped.
response Policies:Anyone who purchases from us gets positive response. If you have any sort of issue with the item you received from us, please contact us before leaving a bad response. We would be more than happy to correct any issue. Regardless if we accidentally sent you the wrong item (which seldom happens) or the customer ordered the wrong part by mistake. WE WILL correct any potential problem.
Sales Tax:The Purchaser shall be responsible for the payment of all state sales taxes.
Liability:UPE_Group is a dstributor and as such, has no direct or indirect control over the materials, processes, or quality control procedures used by the manufacturers of the products we resell. Accordingly, UPE_Group will NOT be held responsible for damages resulting from product defects, or, from mis-applications/improper installations by the customer or end user. It is the purchasers responsibility to determine the suitability of the product for the specific application.If it is deemed defective,UPE_Group shall be held harmless of any and all damages including (but not limited to) physical injury, property damage, water damage or otherwise for any reason.If the purchased item is deemed defective, UPE_Group will make arrangements to replace the defective item at no additional costs to the customer.
CA Prop 65 WARNING:Some of the products sold by Universal Pneumatic and Electric Group may contain chemicals known to the State of California, Vermont and others to cause cancer, birth defects, or other reproductive harm. It is the purchasers responsiblity to determine the suitability of these products for your specific application. Including, but not limited to, using alternative products. UPE_Group shall be held harmless of any and all damages including but not limited to physical, property, water or otherwise for any reason. Your use of any information or materials on this listing is entirely at your own risk, for which we shall not be liable.
By submitting your order, the purchaser acknoledges agreement with the Terms & Conditions as outlined here and our website.
