19PC Front Wheel Drive Bearing Removal and Installation Tool Kit For FWD Vehicle For Sale

Description:

• 100% New and High Quality
• 1 Year Warranty
• Type: Bearing Removal Install Tool
• Set or Single Item: Set
• Color: Black
• Material: Steel
• Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
• Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm

19PC Front Wheel Drive Bearing Removal and Installation Tool Kit For FWD Vehicle

Description:

• 100% New and High Quality
• 1 Year Warranty
• Type: Bearing Removal Install Tool
• Set or Single Item: Set
• Color: Black
• Material: Steel
• Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
• Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm

• Universal 19 pieces hub & bearing puller
• Comprehensive set for the removal and installation of front hub bearings
• Made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
• The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles while keeping the steering knuckle and strut assembled in tact on the vehicle, eliminating the need for front end alignment once the work is done.
• Comes with a durable storage case, convenient to collect the tools and transport.

How to operate?

• Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
• Step.2 Assemble the tool components, and press out the worn bearing.
• Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
• components assembled. Press the bearing into the spindle assembly until it bottoms.
• Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
• Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
• Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
• Noted​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing removal and installation tool comes with adapter plates sized 55–92 mm.For most front wheel drive cars, vans & light trucks. Please note that it is NOT suitable for motorcycles, heavy-duty pickup trucks, or rear-wheel-drive vans. Please verify your vehicle type before ordering to ensure compatibility.

  Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.

  Package includes:

  • 1 × Steel Drifts : 38mm
  • 2 × Drift : 86mm, 91mm
  • 1 × Receiver Sleeve : 76mm
  • 9 × Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
  • 3 × Hub Screw : M12 × 1.5 mm
  • 3 × Hub Screw : M14 × 1.5 mm
  • W/O Product check the pictures carefully before buying to determine whether these products are what you need.

    Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time before opening return or case.

    
    Item SpecificsCountry of Origin United StatesBrand autooopartsManufacturer Part Number APO316184Type Bearing Removal Install ToolWarranty 1 YearMaterial MetalTool Color BlackSet or Single Item SetNumber of Pieces 19PCSFitment Type Direct ReplacementUniversal Fitment YesHub Screws Size (3) M12×11.5, (3) M14×1.5mmDrift Size 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mmFeatures Durable/PortableModel For most front wheel drive cars and vansNotes W/O Product Instruction
    Payment

    We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment.

    Shipping

    We ship worldwide.
    USPS First Class Mail or FedEx shipping, thank you.

    Standard Order Processing time:
    All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

    Returns

    30 DAY MONEY BACK SATISFACTION GUARANTEE
    Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
    In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.

    Contact Us

    Please send all correspondence through the messaging system.
    Messages will be replied within 24 hours.

    About us

    Thank you for visiting our store. We hope you are satisfied with the item and our service.
    Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.

    Lighting & Lamps Shop CategoryStore Home Suspension & Steering Lighting & Lamps◈Fog Lights◈Xenon Headlight Ballast◈Headlight◈Fog Lamps cover◈Turn Lights◈Brake Lights◈Truck Light Strip◈Moto Lighting & Lamps◈Others◈Tail Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Snowthrower Carburetor◈Saw Carburetor◈Tractor Carburetor◈Motorcycle Carburetor◈ATV Carburetor◈Automobile Carburetor◈Others◈Golf Carburetor◈Gasket◈Intake Manifold Boot◈Rebuild kits Boat◈Steering Shaft Pin◈Yacht Light◈Others Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle Solenoid Valve◈Motorcycle fuel Switch Valve◈Others Module◈Transmission Control Module◈Headlight Driver Module◈Fan Control Module◈Others Fule Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Thermostat◈Turbine Cover◈Oil Pan◈Glow Plug◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Engine Hood◈Oil Scale◈Others Auto Ignition System◈Spark Plug◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Car Ignition Module◈Others Auto Hub◈Locking Hub◈Hub Bearing◈Others Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter Motorcycle engine system◈Piston Cylinder Fittings◈Camshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈AC Blower Motor◈Clutch Actuator◈Fuel Door Opener Actuator◈Others Auto Motor◈Transmission stepper motor◈Power Window Lift Motor◈Brake Caliper Servomotor◈Transfer Case Gear Motor◈Front Running Board Motor◈Blower Resistor◈Others Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Power Brake Booster◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Airbag Hairspring◈Positive Battery Cable◈Sensor Harness◈Body Wiring Harness◈Gear Shift Control Cable◈Battery Terminal◈Others Transmission Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Motorcycle Control System◈Gearbox Shift Regulator◈Others Auto Sensor◈TPMS Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Knock (Detonation) Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Fuel Pressure Sensor◈Crankshaft Position Sensor◈Oil Pressure Sensor◈Camshaft Position Sensor◈Ride Height Sensor◈PDC Sensor◈MAP Sensor◈Exhaust Pressure Sensor◈Coolant Temperature Sensor◈Acceleration Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others Auto Interior◈Plastic Rivets Fasteners◈Trunk Shield◈Sunroof Sunshade Corn◈Armrest Center Box Cover◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others◈Floor Mats Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Wiper Blades◈Window Visors◈ Auto body trim panel◈Front bumper trim Auto Pump◈Fuel Pump◈Water Pump◈High Pressure Fuel Pump◈Air Pump◈Power Steering Pump◈Clutch Master Cylinder◈Oil Pump◈Others Business & Industrial▷Industrial Control Module♢Control Valves♢Other▷CNC♢Edge finder♢Drill Bits♢Spring Collet♢Boring Bar♢Mandrel♢Collet Chuck♢Pull Stud♢Quick Change Tool Post♢Drill Chuck♢Drill Chuck Arbors♢Live center♢Vise♢Milling Tools♢Rivet Gun♢Wrenches♢Hydraulic Crimper♢Balance Level♢Drill Bits♢Outside Micrometer♢Casters♢Steel Tape Measure♢Other▷Metalworking Supplies♢Sanding Disc♢Metal Cut Off Wheels♢Flap Discs♢Hose Clamp♢Welding Wire♢Cable♢Piston Driver♢Other▷Generator Accessories♢Automatic Voltage Regulator♢Generator Carburetor♢Other Home & Garden◈Yard, Garden & Outdoor Living◈Lawn Mower Parts◈Chainsaw Parts◈Leafblower Parts◈Snowblower Parts◈Others Radiators & Parts Golf Cart Parts & Accessories◈ Golf car charger◈Others OtherHot Item 12pcs Slow/Pilot Jet for PWK OKO USD 6.56 RED 8PCS 1200° SPARK PLUG WIRE BOOTS HEAT SHIELD PROTECTOR SLEEVE For SBC BBC USD 7.88 Front Lower Bumper Valance W/Tow Hooks For 2016-2018 Chevrolet Silverado 1500 USD 57.80 Knock Sensor with Harness Kit Set For Chevrolet GMC Cadillac Hummer 5.3L / 6.0L USD 28.18 100pcs Fender Bumper Grille Push Type Retainer Clips Rivet for GM Universal USD 5.55 Excellent Delivery
    New List Item Water Pump 16241-73033 For Kubota V1505 V1305 D1105 D905 D1005 16241-73030 USD 25.02 6 Cylinder Diesel Injector Flow Meter Tester Common Rail Adaptor Test Tools Kit USD 34.47 For Caterpillar 246D3 257D 257D3 397-9953 1G398-64012 23992 A5TA8277 Alternator USD 69.94 Camshaft Alignment Timing Tool Kit Flywheel Holder Tool For BMW N20 N26 Engine USD 83.40 For 1997/1998-2013 Chevrolet Corvette C5 C6 Power Steering Pump 20-822 26046503 USD 50.79 19PC Front Wheel Drive Bearing Removal and Installation Tool Kit For FWD Vehicle

    Description:

    • 100% New and High Quality
    • 1 Year Warranty
    • Type: Bearing Removal Install Tool
    • Set or Single Item: Set
    • Color: Black
    • Material: Steel
    • Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32"
    • Hub Screws: (3) M12 × 11.5, (3) M14 × 1.5mm
    • Universal 19 pieces hub & bearing puller
    • Comprehensive set for the removal and installation of front hub bearings
    • Made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
    • The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles while keeping the steering knuckle and strut assembled in tact on the vehicle, eliminating the need for front end alignment once the work is done.
    • Comes with a durable storage case, convenient to collect the tools and transport.

    How to operate?

    • Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
    • Step.2 Assemble the tool components, and press out the worn bearing.
    • Step.3 Lightly lubricate the new bearing, and position it for installation with the tool
    • components assembled. Press the bearing into the spindle assembly until it bottoms.
    • Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
    • Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
    • Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
    • Noted​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing removal and installation tool comes with adapter plates sized 55–92 mm.For most front wheel drive cars, vans & light trucks. Please note that it is NOT suitable for motorcycles, heavy-duty pickup trucks, or rear-wheel-drive vans. Please verify your vehicle type before ordering to ensure compatibility.

      Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.

      Package includes:

      • 1 × Steel Drifts : 38mm
      • 2 × Drift : 86mm, 91mm
      • 1 × Receiver Sleeve : 76mm
      • 9 × Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
      • 3 × Hub Screw : M12 × 1.5 mm
      • 3 × Hub Screw : M14 × 1.5 mm
      • W/O Product check the pictures carefully before buying to determine whether these products are what you need.

        Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time before opening return or case.

        
        
        PaymentShippingReturnsContact UsAbout us

        We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover, Mastercard payment.

        We ship worldwide.
        USPS First Class Mail or FedEx shipping, thank you.

        Standard Order Processing time:
        All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

        30 DAY MONEY BACK SATISFACTION GUARANTEE
        Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
        In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.

        Please send all correspondence through the messaging system.
        Messages will be replied within 24 hours.

        Thank you for visiting our store. We hope you are satisfied with the item and our service.
        Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.

        
        

        All rights reserved.

        
        
        

        On Jun 25, 2026 at 23:02:37 PDT, seller added the following information: